Canon WFT-E8 Bedienungsanleitung

INSTRUCTION MANUALEWireless File TransmitterWFT-E8This product also supports certain CINEMA EOS cameras. For compatible products, contact the nearest

10NomenclatureAttachment pinTightening screwTerminal<F>Wired LAN connectionConnection icon<D>Wireless LAN connectionTransmitter CaseEOS-1D

100Synchronizing the Time8On the master camera, select [OK]. Check the number of slave cameras, then select [OK]. The time on slave cameras is synch

1018Terminating the Connectionand Reconnecting

1021Select [Communication settings]. Under the [53] tab, select [Communication settings], then press <0>.2Select [Network settings]. Set [Comm

1031Select [Communication settings]. Under the [53] tab, select [Communication settings], then press <0>.2Select [Network settings]. Set [Comm

104MEMO

1059Checking and OperatingConnection Settings

106Check, change, or delete connection settings saved on the camera.1Select [Communication settings]. Under the [53] tab, select [Communication setti

107Displaying the Connection Settings Screen5Check or change the settings. Select an item and press <0>, then check or change the settings on t

108Settings originally completed using the connection wizard can be changed as follows. You can also change settings that cannot be set using the conn

109Changing Settings[FTP server]This is displayed for settings that connect to an FTP server. Configure FTP server settings.[Viewable imgs] (p.80)This

11Set the camera’s power switch to <2> before attaching the transmitter.The transmitter is powered by the camera. Ensure the camera battery has

110Changing SettingsConfigured in [FTP server] 9 [Directory structure].Selecting [Camera] automatically creates a folder structure matching that of th

111Changing SettingsConfigured in [FTP server] 9 [Passive mode].Enable this setting in network environments protected by a firewall. If an Error 41 oc

112Connection settings can be saved on a card for use with other cameras. In addition, connection settings configured on other cameras can be applied

113Saving and Loading Settings1Select [Save/load settings on card]. On the [Connection settings] screen displayed in step 5 on page 107, select [Save

114On the [Function settings] screen, you can configure settings for FTP transfer and the WFT Server, set the power saving function, and check the MAC

115Function Settings Screen[FTP transfer settings]Configure FTP transfer settings. See page 37 to set.[WFT server settings]Configure WFT Server settin

116Function Settings Screen[Power saving] FTP Trans.When [Enable] is set, if no image is transferred for a certain period of time, the transmitter wi

11710Troubleshooting GuideTransfer speed in ad hoc mode may become extremely slow when the transmitter is used with certain types of computer. For mor

118If a wireless setting error is displayed on the camera’s LCD monitor, refer to the examples of corrective actions in this section to eliminate the

119Responding to Error Messages In the case of [EOSUtility], is EOS Utility running? Start EOS Utility and re-establish the connection (p.56). In t

12Attaching to the CameraMovie Shooting When an External Microphone is UsedAn external microphone may pick up noise while wireless functions are in us

120Responding to Error MessagesWhat to check on the DHCP server Is the power of the DHCP server on? Turn on the DHCP server. Are there enough addre

121Responding to Error MessagesWhat to check on the transmitter On the transmitter, DNS address is set to [Manual setting]. Is this the correct setti

122Responding to Error MessagesWhat to check on the transmitter Is another device on the transmitter network using the same IP address as the transmi

123Responding to Error MessagesWhat to check on the proxy server Is the power of the proxy server on? Turn on the proxy server. Is the proxy server

124Responding to Error MessagesWhat to check on the transmitter On the transmitter, does the FTP server’s IP address setting match the server’s actua

125Responding to Error MessagesWhat to check on the FTP server Is the FTP server working correctly? Configure the computer correctly to function as

126Responding to Error MessagesWhat to check on the network as a whole Does your network include a router or similar device that serves as a gateway?

127Responding to Error MessagesWhat to check on the transmitter On the transmitter, is the [Login name] entered correctly? Check the login name for

128Responding to Error MessagesWhat to check on the FTP server The connection was terminated by the FTP server. Restart the FTP server. Do the user

129Responding to Error Messages Are any obstacles blocking the line of sight between the transmitter and the antenna of the access point? Move the a

131Basic Network SettingsComplete the basic network settings by using the menu screen on the camera’s LCD monitor.

130Responding to Error Messages Are the transmitter and the access point set to use the same authentication method? The transmitter supports the fol

131Responding to Error Messages Are any obstacles blocking the line of sight between the transmitter and the antenna of the access point? Move the a

132Responding to Error Messages Are the transmitter and the access point set to use the same encryption method? The transmitter supports the followi

133Responding to Error Messages Are you following the correct procedure to establish the connection with slave cameras? Operate slave cameras by fol

134Responding to Error Messages Is the transmitter attached correctly? Make sure the transmitter is securely inserted in the camera (p.11). Due to

135If a problem occurs, first refer to this Troubleshooting Guide to check the camera and connected device. If this Troubleshooting Guide does not res

136If the transmission rate drops, the connection is lost, or other problems occur when using the communication function, try the following corrective

137Communication Function Setting Notes When multiple cameras with a wireless transmitter attached are connected to one access point, make sure that

138 WindowsOpen the Windows [Command Prompt], then type ipconfig /all and press the <Enter> key.The IP address assigned to the computer is disp

13911Reference

14 [FTP trans.]You can transfer captured images to an FTP server.Images can be automatically transferred as you shoot them, or you can select images

140Follow these steps to create captions and register them on the camera, as introduced in “Adding a Caption Before Transfer” (p.52). When creating an

141Creating and Registering Captions3Enter the caption or captions. Enter up to 31 characters (in ASCII format). To acquire caption data stored in t

142Set the network settings for the camera access point mode manually. Set [SSID], [Channel setting], and [Encryption settings] on each screen display

143Setting Network Manually4Select the desired encryption setting. For encryption, select [AES]. Select [OK] and press <0>. When [AES] is sel

144Set the IP address settings manually. The items displayed will differ depending on the communication method.1Select [Manual setting]. Select [OK]

145Setting IP Address Manually4Select [OK]. When you have completed setting the necessary items, select [OK] and press <0>. The setting screen

1469TypeType: IEEE 802.11ac/n/a/g/b wireless LAN compatible image transfer accessory9Wireless LANStandards compliance: IEEE 802.11ac, IEEE 802.11n, IE

147Specifications9LAN FunctionsFTP transfer: Automatic transferImage selection and transferTransfer using SET buttonTransfer with captions* FTPS suppo

148Trademarks Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Ma

149IndexAAccount (WFT)...60, 115Ad hoc...91AES...

15Preparation [EOSUtility]You can perform remote shooting over a wireless LAN using EOS Utility (EOS software).In addition to remote shooting, almost

150IndexPassword ...60PBC mode ...28PIN code connection mode...29PIN

151MEMO

The descriptions in this Instruction Manual are current as of February 2016. For information on the compatibility with any products introduced after t

16Preparation [Smartphone]You can perform basic remote shooting or view images stored in the camera on a smartphone or tablet.To use this function, a

17PreparationWhen connecting using an access point, connect the target device to the access point in advance.Connecting Using an Access PointTransmitt

18First, configure basic communication function settings.1Turn the camera on.2Select [Communication settings]. On the camera, press the <M> but

19Basic Communication Function SettingsSet a nickname (for identification) for the camera.When the camera is connected to another device over a LAN, t

2The transmitter is an accessory for EOS cameras that enables wireless functions when attached to the camera.Using the transmitter’s wireless function

20Basic Communication Function Settings4Enter a nickname. For instructions on entering characters, see the next page. Enter any characters between 1

21Basic Communication Function Settings Changing the entry areaPress the <Q> button to toggle between the top and bottom entry areas. Moving t

22This section describes the process following the connection instructions. If an error is displayed, see “Troubleshooting Guide” in Chapter 10 (p.117

23Displaying the Connection Wizard4Select [SET*].5Select [Connection wizard]. The [Select communication method] screen is displayed. The <Y> l

24Displaying the Connection Wizard8Select the connection method. Not displayed when [FTP trans.] is selected in step 6. Proceed to step 9. Select an

25The instructions in this chapter are continued from page 24.The camera and each device can be directly connected wirelessly. No access point is nece

26Connecting with Easy ConnectionThe following instructions are for settings screens that vary depending on the communication method. Read the page th

27To connect using an access point, check if the access point supports WPS* that allows easy connection between Wi-Fi devices.If you do not know if th

28The instructions in this chapter are continued from page 27.This is a connection mode available when using an access point compatible with WPS. In p

29The instructions in this chapter are continued from page 27.This is a connection mode available when using an access point compatible with WPS. In P

3 To comply with local radio wave regulations, Canon offers five region-specific versions of the transmitter (A, B, C, D, and E) in various areas aro

30Connecting via WPS (PIN Mode)4Connect to the access point. Select [OK] and press <0> to establish a connection with the access point. When a

31The instructions in this chapter are continued from page 27.Establish a connection by selecting the SSID (or ESS-ID) of the access point to connect

32Connecting to a Detected Network Manually Enter the encryption key (password) specified for the access point. For details on the specified encrypti

33Connecting to a Detected Network Manually4Enter the encryption key. Enter the encryption key using the virtual keyboard (p.21), then press the <

34Select [Auto setting]. Select [OK] and press <0> to display the setting screen for the communication method (p.35). If [Auto setting] result

35Setting the IP AddressThe following instructions are for settings screens that vary depending on the communication method. Read the page that introd

36Setting the IP AddressCamera access point mode is a connection mode for connecting the camera directly to each device.Displayed when [EOSUtility], [

372Transferring Images toan FTP ServerBy connecting to an FTP server, you can transfer images stored in the camera to a computer.With FTP transfer, yo

38These instructions are continued from Chapter 1.1Select an FTP mode. To establish security for FTP transfer using a root certificate, select [FTPS]

39Configuring FTP Server Connection Settings4Set the port number. [Port number setting] should usually be 00021. Select [OK] and press <0> to

4Conventions Used in this ManualBasic Assumptions All operations explained in this manual assume that the power switch is set to <1>. It is as

40Configuring FTP Server Connection Settings8Set the target folder. Select [Root folder] to have images saved in the root folder as specified in FTP

41Configuring FTP Server Connection SettingsIf the FTP mode is set to [FTPS] when configuring the connection settings, the same root certificate as th

42Configuring FTP Server Connection Settings5Select [Set root certif].6Select [Load root certif from card].7Select [OK]. The root certificate is impo

43An image can be automatically transferred to the FTP server immediately after shooting. You can also continue still photo shooting even while images

44Transferring Images Individually5Select [Automatic transfer]. Select [Enable].6Take the picture. The captured image is transferred to the FTP serv

45Transferring Images IndividuallySimply play back an image and press <0> to transfer it. You can also continue still photo shooting even while

46Transferring Images IndividuallyYou can select which images to transfer when recording images of different sizes to a CF card and CFast card simulta

47Transferring Images IndividuallyIf transfer fails, the <Y> lamp on the camera blinks in red. In this case, press the <M> button, select

48After shooting, you can select multiple images as desired and transfer them all at once. You can also transfer unsent images or images that could no

49Batch Transfer4Select images to transfer. Turn the <5> dial to select the image to be transferred, then press <0>. Turn the <5>

5Chapter ListIntroduction2Basic Network Settings13Transferring Images to an FTP Server37Operating Remotely Using EOS Utility55Operating Remotely Using

50Batch Transfer Sel.nSelect [Sel.n] and select [Folder images not transfer’d]. When you select a folder, all the images in that folder not yet trans

51Batch TransferFor RAW+JPEG images, you can specify which image to transfer.In step 2 on page 48, select [RAW+JPEG transfer], and select the image to

52Batch TransferWhen you select [Transfer with caption] in step 2 on page 48, you can add a registered caption to each image before transfer. This is

53Images transferred to the FTP server are stored in the following folder as specified in the FTP server settings. Under the default settings of the

54MEMO

553Operating RemotelyUsing EOS UtilityUsing EOS Utility, you can view images stored in the camera or save them to a computer. Additionally, you can op

56These instructions are continued from Chapter 1. To establish a connection, operations on the computer are required. For details, refer to the comp

57Configuring EOS Utility Connection Settings4Click [Connect] on the computer. Select the camera to connect to, then click [Connect]. If multiple ca

58For EOS Utility instructions, refer to the EOS Utility Instruction Manual. In addition to remote shooting, various camera operations are available.U

594Operating RemotelyUsing WFT ServerUsing a web browser, you can view images stored in the camera or save them to a computer, smartphone, etc. Additi

62134Introduction 2Conventions Used in this Manual... 3Chapter List ...

60These instructions are continued from Chapter 1.Enter a login name and password for connecting to the camera from a computer. The login name and pas

61Configuring WFT Server Connection Settings4Select [OK]. Select [OK] and press <0>. A connection completion screen will appear.5Select [OK].

62In the web browser, display WFT Server, a screen for transmitter operations. Connect the camera to a computer, smartphone, etc. via LAN in advance.T

63Displaying WFT Server5Select [Confirm settings]. The settings are displayed.6Check the settings. Turn the <5> dial to display other screens.

64Displaying WFT Server9Enter the [Login name] and [Password]. Enter the [Login name] (user name) and [Password] specified on page 60. Press [OK] to

65You can browse images on the camera’s card as follows.1Press [3 Viewer]. The image viewing screen is displayed.2Select the card and folder. Press

66Viewing Images4Download images. When you select a thumbnail, the image is displayed at a larger size. Press [ ] to download the image. Press [ ]

67You can use WFT Server to shoot remotely.1Press [z Camera control]. The advanced capture screen is displayed.Shooting Remotely [Camera control](1)

68Shooting Remotely [Camera control]2Set the lens’s focus mode switch to <f>. When you press and let go of the Shutter button (6), the camera w

69Shooting Remotely [Camera control]1Display Live View image. Press the Still photo Live View shooting button (15).2Adjust the focus.Using autofocus

7Contents101169785Operating Remotely Using a Smartphone 75Configuring Smartphone Connection Settings...76Operating the Ca

70Shooting Remotely [Camera control]3Configure the shooting settings. Select setting items (such as image-recording quality) to view the setting deta

71Shooting Remotely [Camera control]Press the Movie shooting button (16) to display the movie shooting screen. The setting procedures are the same as

72Although detailed function settings are not available on the basic capture screen, it is convenient for shooting remotely using a smartphone or othe

73Shooting Remotely [Simple control]2Adjust the focus. Set the lens’s focus mode switch to <f>.Using autofocus Press [ON] on the AF button to

74Remote shooting in WFT Server can be used in conjunction with the transmitter’s “Linked Shooting” function (p.83). Additionally, images on the maste

755Operating RemotelyUsing a SmartphoneUsing a smartphone, you can view images stored in the camera or save them to the smartphone. Additionally, you

76These instructions are continued from Chapter 1. To establish connection, operations on the smartphone are required. For details, refer to the smar

77Configuring Smartphone Connection Settings3Connect to the camera. When a connection is established, the screen on the left will appear on the camer

78You can use a smartphone with Camera Connect installed to view images stored in the camera and shoot remotely.The main functions of Camera Connect a

79Operating the Camera Using a Smartphone When the connection is terminated while recording a movie with remote shooting, the camera responds as foll

8The following precautions are provided to prevent harm or injury to yourself and others. Make sure to thoroughly understand and follow these precauti

80You can specify images viewable from a smartphone by operating the camera. Images can be specified during connection setup or after the connection i

81Specifying Viewable Images6Select [Viewable imgs].7Select an item. Select [OK] and press <0> to display the setting screen.[All images]All im

82Specifying Viewable Images[Select by rating]Specify viewable images depending on whether a rating has been added (or not added) or by the type of ra

836Linked ShootingWith linked shooting, up to 10 slave cameras can be linked in a wireless network to the master camera on which you will release the

84Link the master camera to slave cameras for basic linked shooting. When the Live View shooting/Movie shooting switch is set to <k>, linked sh

85Basic Linked Shooting5Select [Connection wizard].6Select [Slave]. Select [OK] and press <0> to go to the next screen. The slave cameras are n

86Basic Linked ShootingSet up the master camera by operating the camera to use as the master.7Select [Master]. Perform steps 1 to 5 on page 84 for th

87Basic Linked Shooting11On all cameras, select [OK]. On the master camera and all slave cameras, select [OK]. Settings information is stored in the

88 Set the Live View shooting/Movie shooting switch to <A>. Position the slave cameras in clear view of the master camera, without objects bet

89Positioning the Cameras If focus cannot be achieved with autofocus, linked shooting is not possible with the corresponding slave camera units. Do

9Safety Precautions The transmitter is a precision instrument. Do not drop it or subject it to physical shock. The transmitter is not waterproof. Do

90Using WFT Server, you can shoot remotely with a master camera linked to slave cameras set to shoot at the same time. WFT Server can also be used to

91Using the Transmitter with WFT Server1Set up the slave cameras. Perform steps 1 to 6 on page 84 for the cameras to use as slaves. When the next scr

92Using the Transmitter with WFT Server6Enter the encryption key. Enter a 5-digit encryption key (password) and press the <M> button. Set the

93Using the Transmitter with WFT ServerYou will need the camera’s IP address and SSID, displayed in step 6, to connect to the camera from a computer.1

94Using the Transmitter with WFT Server5Select [Confirm settings]. The settings are displayed.6Check the settings. Turn the <5> dial to displa

95Using the Transmitter with WFT ServerTo connect the cameras and the computer, use the computer’s wireless LAN device search function. For informati

96Using the Transmitter with WFT Server For how to use WFT Server, see page 59. To switch cameras, enter the IP address of the master or slave camer

977Synchronizing theCamera Time WirelesslyYou can wirelessly synchronize multiple cameras of the same camera model when the transmitter is attached.Yo

98Steps 1 to 5 are the same on the master and slave cameras.1Select [Communication settings]. Under the [53] tab, select [Communication settings], th

99Synchronizing the Time5Select [Wireless]. Select [OK] and press <0> to go to the next screen.6Set up the master camera. Select [Master], the