Appendix Appendix B - Reader & Camera Specifications 159
1. Baud Rate. The controller default baud rate is 9600. Ask your BlipChip* service person what the baud rate
is set to if 9600 does not work. The unit can be changed in the field to other baud rates. 9600 is normally
preferred.
2. Stop Bits = 1
3. Data Bits = 8
4. Parity = None
The cable needed is called a Null Modem cable and comes in two varieties9 pin to 25 pin for a PC/AT or 25
pin to 25 pin for a PC/XT. Check with your computer vendor as to which type your computer has. These cables
are generally available at stores like Radio Shack. The cable is plugged into any available COM port of your
PC and into the 25-pin connector on the rear of the BlipChip* controller.
)
Note: If you cannot find a Null Modem cable, ask for a Serial Printer cable. Most stores will understand what a
serial printer cable is.
* BlipChip is a Trademark of BlipChip Corporation.
Minolta DR1600 and DAR2800 Setup
The DR1600 or DAR2800 camera needs to be configured with the optional RS-232 controller. The camera then needs to
be set up by your Minolta service person to include the following parameter:
1. Baud Rate = 9600
The cable needed is called a Null Modem cable and comes in two varieties9 pin to 25 pin for a PC/AT or 25
pin to 25 pin for a PC/XT. Check with your computer vendor as to which type your computer has. These cables
are generally available at stores like Radio Shack. The cable is plugged into any available COM port of your
PC and into the 25-pin connector on the rear of the DR1600 or DAR2800 Camera.
)
Note: If you cannot find a Null Modem cable, ask for a Serial Printer cable. Most stores will understand what a
serial printer cable is.
)
Note: The factory preset baud rate needs to be changed to 9600 baud.
Canon CF100 Setup
The CF100 camera needs to be configured with the optional RS-232 controller. The camera then needs to be set up by
your Canon service person to include the following parameter:
1. Baud Rate = 9600
The cable needed is called a Null Modem cable and comes in two varieties9 pin to 25 pin for a PC/AT or 25
pin to 25 pin for a PC/XT. Check with your computer vendor as to which type your computer has. These cables
are generally available at stores like Radio Shack. The cable is plugged into any available COM port of your
PC and into the 25-pin connector on the rear of the CF100 Camera.
)
Note: If you cannot find a Null Modem cable, ask for a Serial Printer cable. Most stores will understand what a
serial printer cable is.
(122 Seiten)
(86 Seiten)
(32 Seiten)
(189 Seiten)
(3 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern