Canon MiniTT1 Bedienungsanleitung PDF herunterladen (Seite 2)

Specifications:

compatibility:

Canon E-TTL II & Nikon CLS / i-TTL compatible - Visit PocketWizard.com

for an updated compatibility list.

requency:

433.42 - 434.42 MHz

US FCC / IC

340.00 - 354.00 MHz

hannels:

35 Channels over 5 Frequencies

US FCC / IC

52 Channels over 26 Frequencies

Antenna:

Internal

ransmit output power:

Transmit output power:T

Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)

ange performance:

10 to 240 meters (30 to 800 feet) depending on ﬂ ash used,

antenna orientation, RF shielding and other variables

ounting:

Hot shoe only

aximum shooting rate*:

TTL Mode:

within 1 FPS of camera’s maximum FPS

Basic Trigger Mode:

Camera Max FP

*dependent on ﬂ ash power settings FPS = Frames Per Second

Power

& Conﬁ guration/

OFF - C.2 - C.1

& Conﬁ guration/ OFF - C.2 - C.1 & Conﬁ guration/

Channel switch:

Status indicator:

LED: Green, Amber, Red status indications

Voltage present:

3.3 VDC (all pins) - safe for all cameras

Hot shoe voltage handling:

Up to 50 volts

USB:

USB Compliant 2.0, Mini-B connector

Operating temperature:

Above -15°C (5°F) and below 50°C (120°F)

torage temperature:

Above -30°C (-22°F) and below 85°C (185°F)

(without battery)

Housing

High impact plastic, captive battery door,

hot shoe made of glass reinforced resin

ower:

3 volt Lithium battery, CR2450 (included)

or CR2354 Lithium coin cell type

attery life:

Hundreds of hours of camera “awake time”

depending on shooting habits

Dimensions:

7.1 cm (2.8”) long x 4.9 cm (1.9”) wide x 3.3 cm (1.3”) tall

Weight:

65 grams (2.3 oz), 57 grams (2.0 oz) without battery

Included in the box:

MiniTT1 Transmitter, USB cable, CR2450 battery, Quick Guide

Features & Functions:

Control the Light

ControlTL is designed to work seamlessly with Canon’s E-TTL II & Nikon’s

CLS / i-TLL ﬂ ash system to give you full TTL autoﬂ ash with speedlights or the

precision of manual power control with speedlights and select studio ﬂ ash

systems. ControlTL offers features and controls never before available in a

wireless photo control system.

Manual Power Control

Remotely adjust the manual power settings of your ﬂ ashes in up to three zones.

You can have as many ﬂ ashes in each group as you want.

PowerTracking

Automatically adjusts for changes in shutter speed, f-stop or ISO when working

in TTL mode. Shoot carefree without the need to readjust your lighting.

Optimized HSS

Get more light, faster recycling times and more shots per battery with

Canon’s High Speed Sync (HSS/FP) mode, optimized by PocketWizard’s

ControlTL technology. Now you can take advantage of this great feature and

shoot wide open in full sun with remote ﬂ ash.

Pre-Flash Boost

In some TTL situations, including shooting in full sun, over long distance or using

diffusers or bounce ﬂ ash, the normal pre-ﬂ ash is simply not enough for the

camera to see. Pre-Flash Boost allows you to compensate for the light loss when

defusing or bouncing.

HyperSync

™

HyperSync allows photographers to achieve faster X-sync speeds with full power

ﬂ ash. Now you can cut the ambient light and use wide open apertures, outdoors

in bright sunlight. That extra speed can also freeze action, whether shooting

models or athletes in motion.

*Every camera/ﬂ ash system performance will be different.

Optimized Rear Curtain Sync for Canon

Precise rear curtain sync capability is engaged automatically, no buttons to

press. Set the shutter speed at which rear curtain sync is engaged with the

PocketWizard Utility. Capture natural light trails with sharp exposures at the end

– no “after trails!”

Basic Trigger Mode

Allows the MiniTT1 to work as a basic trigger on any camera it will ﬁ t.

PocketWizard Compatible

Works with all PocketWizard radios on the same frequency including

PocketWizard OEM Partner products like Sekonic meters and Profoto, Bowens,

Calumet, Dynalite, Lumedyne, Norman and Photogenic ﬂ ash packs for standard

triggering, HyperSync and Rear Curtain Sync.

PocketWizard Utility

Using a standard USB connection and the free PocketWizard Utility, you

can easily conﬁ gure your channel settings, dial in your HyperSync timing, adjust

your sleep mode timers and update your product to the latest ﬁ rmware virtually

making your MiniTT1 and FlexTT5 radios “Future Proof”.

Channels / Learn Mode

The MiniTT1 has two channel conﬁ guration settings; C1 and C2. Each can be

programmed as needed for TTL photography or standard channels for manual

ﬂ ash photography. Channels can be conﬁ gured using the PocketWizard Utility

or use the Learn function.

ZoneControl

Add the AC3 ZoneController on top of your MiniTT1 and gain three zones of

power control right from the camera’s position. Works in both auto / TTL and

manual. Shut down an entire zone with the ﬂ ick of a switch.

AC3 ZoneController sold separately.

Continuous Fast FPS

Never before have you been able to shoot remote TTL non-stop in continuous

high-speed mode. Fill the buffer! Nothing else comes close.

Low Proﬁ le Design

The lay-ﬂ at design with integrated hot shoe and internal antenna keeps a very

low proﬁ le on your camera. Powered by a CR2450 lithium coin cell battery.

Radio Communication

Shoot through walls, around corners, in bright sun at longer range.

www.PocketWizard.com

[email protected]

MAKE IT POSSIBLE

™

v1.0 - September 2010

Note:

Information subject to change. Visit pocketwizard.com for the most up to date product information.

Note: Information subject to change. Visit pocketwizard.com for the most up to date product information.Note:

1 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Canon MiniTT1 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamerazubehör Canon MiniTT1