Canon Command Back70/80/90Posted 9-14-03 This camera manual library is for reference and historical purposes, all rights reserved.This page is copyrig
Any of three formats (year/month/day, day/month/year, and month/day/year) may be selected in the date mode. The year/month/day display is initially se
3. When the position selector is pressed,'85 (year) will start flashing.4. Press the number set button while '85 is flashing until '88
3. When the position selector is pressed once, the colon will start flashing. When it is pressed again, 30 (minute) will start flashing.4. Press the n
3. When the position selector is pressed once, the "00" on the right will start flashing.4. Press the number set button while the "00&q
4. Press the number set button once while the 00 is flashing to set 01.5. Press and release the position selector twice to stop the flashing. The fram
4. To set the timer control function with the Command Back 90, set the T90 for continuous shooting.5. Do not set the self-timer on the camera itself w
(2) Setting the Interval TimerThe interval timer can be set in 1-sec. units to any value from 1 sec. to 23 hrs., 59 mine., 59 sees.EXAMPLE When you wa
When you want to keep the shutter open for 4 hrs., and 15 min. 1. Set the camera to "bulb."2. Select the timer control function by pressing
5. Press the position selector once again to stop the flashing.6. To start taking pictures, press the start/stop/clear button once. After the camera h
combinations in 3). This is excluding the case of the OFF mode and regarding all three displays of the date mode as one mode. In the case of the Comma
Designed exclusively for the Canon T70, T80 and T90 respectively, the Canon Command Back 70, Command Back 80 and Command Back 90 are special data back
2. When the timer control function is combined with the data recording function, the LCD panel display will appear as follows: 1) The LCD panel autom
EXAMPLE 1When you want to use the interval timer mode set at 4 hrs., 15 mine., and the long release timer mode set at 10 sees.1. Set the camera to &qu
1. Set the camera to "bulb."2. Select the data recording function by pressing the data/timer selector.3. Select the 4-digit frame counter mo
7. Select the long release timer mode andset it to 00:00 208. Select the frame counter setting mode and set it to 079. Press the start/stop/clear butt
3) Insert the tip of the screwdriver into the chamber and then push the battery to the left. The battery will pop up (illus. A).4) Wait for at least 1
e) OFF (non-recording)2) External display of data: Using a 7-segment, 6-digit LCD display that shows what is recorded on the film. (OFF is displayed o
Timer control and data recording functions in combination:Can be used in combination. Data set prior to the selection of the timer mode is coupled to
Table of of Contents 1. Nomenclature P. 3 2. Basic Functions of Control Buttons ..P. 4 3. Function Displays P. 6 4. Attaching the Command Back to the
2. Basic Functions of Control Buttons The basic functions of the Command Back's various control buttons are as follows: 1. Mode Selector--Sele
3. Function Displays - 4. Attaching Command Back to the Camera
Be sure that there is no film in the camera before attaching the Command Back. Other wise, the film will be exposed when the regular camera back is op
It is unnecessary to set the film speed on the Command Back 90, since the DX data of the film is automatically transmitted from the T90. The light int
1. Switching between the data recording function and timer control function Operation is switched between the data recording function and the timer co
Month and Day -> 1Hour -> 0Minute, Second, and other numerals -> 00 Command Back 90Year -> '85Month and Day -> 1Hour -> 0Minute
Kommentare zu diesen Handbüchern