Canon EOS 7D Bedienungsanleitung PDF herunterladen (Seite 116)

116

D Using the Built-in Flash

Effective Range of Built-in Flash [Approx. meters/feet]

Using the red-eye reduction lamp before taking a flash picture can

reduce red eye.

Under the [1] tab, select [Red-eye

On/Off], then press <0>. Select

[On], then press <0>.

For flash photography, when you

press the shutter button halfway, the

red-eye reduction lamp will light. Then

when you press the shutter button

completely, the picture will be taken.

Aperture

ISO Speed

100 200 400 800 1600 3200 6400 H: 12800

f/3.5

3.5 / 12 5 / 16 7 / 23 9.5 / 31 14 / 46 19 / 62 27 / 89 39 / 128

f/4

3 / 10 4 / 13 6 / 20 8.5 / 28 12 / 39 17 / 56 24 / 79 34 / 112

f/5.6

2 / 7 3 / 10 4.5 / 15 6 / 20 8.5 / 28 12 / 39 17 / 56 24 / 79

3 Using Red-eye Reduction

For close subjects, the subject should be at least 1 meter/3.3 feet away

when using flash.

Detach the lens hood and keep at least 1 meter/3.3 feet away from the subject.

If the lens has a hood attached or you are too close to the subject, the

bottom of the picture might look dark due to the obstructed flash. If you

use a telephoto lens or a fast lens and the built-in flash is still partially

obstructed, use an EX-series Speedlite (sold separately).

The red-eye reduction feature is most effective when the subject looks at the red-

eye reduction lamp, when the room is well lit, or when you go closer to the subject.

When you press the shutter button halfway, the

display on the viewfinder bottom will gradually turn

off. For best results, take the picture after this display

turns off.

The effectiveness of red-eye reduction varies depending on the subject.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 291 292

Keine Kommentare

Canon EOS 7D Bedienungsanleitung Seite 116