Canon DR-2010M Bedienungshandbuch PDF herunterladen (Seite 13)

Documents

The scanner can scan documents ranging in size from business cards

and checks to LTR/A4. The document sizes that this scanner can scan

are shown below.

Plain Paper

Size

Width: 1.97" to 8.5" (50 mm to 216 mm)

Length: 2.12" to 14.02" (53.9 mm to 356mm)*

Paper weight: (Page separation mode)

14 to 32 lb bond (52 to 128 g/m

) 0.0024" to 0.0059" (0.06 mm

to 0.15 mm)

Paper weight: (Bypass mode)

11 to 42 lb bond (40 to 157 g/m

) 0.002" to 0.0079" (0.05 mm to

0.20 mm)

* You can scan documents up to 39.2" (1000 mm) long by setting

the scanner to the Long Document mode. (See “Setting the Long

Document Mode” on page 24.)

IMPORTANT

A document must meet the following criteria to be scannable:

• When scanning multiple documents of different sizes, place the

documents so that they cover the entire span of the feed rollers.

• It is recommended that documents exceeding LTR, 11.69" (A4, 297

mm) size are fed one sheet at a time.

• Scanning documents before the ink is dry can cause problems with

the scanner. Always make sure that the ink on a document is dry

before scanning it.

• Scanning documents that are written in pencil or similar material

may make the rollers and scanning glass dirty, which can lead to

smudges on the scanned image and transfer the dirt to subsequent

documents. Always clean the internal parts of the scanner after

scanning such documents.

• When scanning a two-sided document that is printed on thin paper,

the image on the opposite side of each page may show through. In

this case, adjust the scanning intensity in the application software

before scanning the document.

• It is recommended that thin documents are fed one sheet at a time.

• Scanning the following types of documents can cause a paper jam

or malfunction. To scan such a document, make a photocopy of the

document and then scan the photocopy.

Business Card

Size: 1.97" x 2.12" (50 mm x 53.9 mm) or larger

Paper weight: 140 lb bond (300g/m

) 0.0138" (0.35 mm) or less

IMPORTANT

If a stack of business cards cannot be fed properly, reduce the

number of cards in the stack.

Card

Size: 2.12" x 3.37" (53.9 mm x 85.5 mm) (ISO/JIS

standard)

Card thickness: 0.03" (0.76 mm) or less

Orientation: Horizontal feeding only

Embossed cards can be scanned.

CAUTION

• If you place cards to be fed vertically, they may not be ejected

properly, and cards that get jammed may be damaged when you

remove them. Take care of the orientation when placing cards.

• Embossed cards may not be able to be scanned correctly,

depending on the type of embossment.

Wrinkled or creased

documents

Carbon paper

Curled documents Coated paper

Torn documents

Extremely thin,

translucent paper

Documents with paper

clips or staples

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Canon DR-2010M Bedienungshandbuch Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Adapter für die Scannertransparenz Canon DR-2010M