Canon PowerShot G9 X Mark II Bedienungsanleitung Seite 86

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 219
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 85
95
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Recording Movies at Specic Shutter
Speeds and Aperture Values
Still Images
Movies
Set your preferred shutter speed, aperture value, exposure, and ISO
speed.
For details on available shutter speeds, aperture values, and ISO speeds,
see “Shutter” (
=
211), “Aperture” (
=
211), and “Changing the ISO
Speed” (
=
74).
1
Enter [ ] mode.
z Set the mode dial to [ ].
z Touch [
], and then choose [ ].
z To conrm your choice, touch [OK].
2
Congure the settings.
z Touch [ ] (1), choose an item to
congure (2), and then turn the [ ] ring to
specify a value.
3
Shoot.
z Press the movie button.
z During recording, you can switch
the setting to congure by touching
[
] repeatedly and adjust the value by
turning the [ ] ring.
Some shutter speeds may cause ickering on the screen when
recording under uorescent or LED lighting, which may be
recorded.
(
1
)
(
2
)
Adjusting the Flash Output
Still Images
Movies
Choose from the three ash levels in [ ][ ][ ] modes.
1
Specify the ash mode.
z Press the [ ] button, choose [Flash
settings] on the [ 5] tab, and then set
[Flash Mode] to [Manual].
2
Congure the setting.
z Raise the ash, press the [ ] button, and
choose [ ] in the menu. Turn the [ ] ring
to choose the ash output level, and then
press the [ ] button.
z Once the setting is complete, the ash
output level is displayed.
[
]: Minimum, [ ]: Medium,
[ ]: Maximum
You can also set the ash level by accessing MENU (
=
29)
and choosing [
5] tab > [Flash settings] > [Flash Output].
You can also access the [Flash settings] screen (
=
29) as
follows.
- Press the [
] button when the ash is up, choose [ ] in the
menu, and then press the [
] button.
Seitenansicht 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 218 219

Kommentare zu diesen Handbüchern

Keine Kommentare