Canon EOSIX Lite Bedienerhandbuch PDF herunterladen (Seite 24)

Metered Manual Flash Exposures

When the Speedlite is attached to an EOS-1 0 series camera, you can

set the flash level manually for closeup subjects.

1 Set the camera and Speedlite.

Set the camera's shooting mode to <M > or <

• ' Set the Speedlite to manual flash.

Focus the subject.

Focus manually.

3 Set up an

18%

gray card.

• Place the gray card at the subject's position.

•

the viewfinder, the entire spot metering circle at the center

should cover the gray card.

4 Press the <

FEL

> button.

(816)

The Speedlite will fire a preflash and the required flash output for

the subject is retained

memory.

On the right side

the viewfinder, the exposure level indicator

will show the flash exposure level for the correct flash exposure.

S Set the flash exposure level.

• Adjust the Speedlite's manual flash level and the

camera aperture so that the flash exposure level

aligns with the standard exposure index.

6 Take the picture.

• Remove the gray card and take the picture.

[i] This feature works only with EX-series Speedlites with manual flash coupled

with an EOS-1D series camera.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 61 62

Keine Kommentare

Canon EOSIX Lite Bedienerhandbuch Seite 24