Canon imagePROGRAF iPF685 Grundlegende Anleitung PDF herunterladen (Seite 92)

Holding it at the positions indicated, close the Roll

Cover.

Pull the Release Lever forward.

Roll paper cannot be inserted into the paper feed slot

Cause Corrective Action

The roll paper is warped. Straighten out curls and reload the roll.

Paper is jammed by the paper feed slot. Remove the jammed paper.

(See "Clearing Jammed Roll Paper.") ➔ P.84

(See "Clearing a Jammed Sheet.") ➔ P.87

The paper source selection is incorrect. Press the Load button and select the paper source.

Cannot load sheets

Cause Corrective Action

The paper source selection is incorrect. Press the Load button and select the paper source.

Paper is not cut neatly

Cause Corrective Action

The paper is bent or curled at the cut posi-

tion.

Straighten out any curling by the edges of the paper.

Paper rises by the ends of the cut position

before it is cut.

Reload the paper correctly.

You are using paper that cannot be cut with

the Cutter Unit.

Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a

cutting tool to cut the roll after printing.

(See "Specifying the Cutting Method for Rolls.") ➔ User's Guide

Roll paper cannot be inserted into the paper feed slot

iPF685 Series

Basic Guide

Troubleshooting Problems Regarding Paper

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 134 135

Keine Kommentare

Canon imagePROGRAF iPF685 Grundlegende Anleitung Seite 92