Canon BJC-6000 Technical Information PDF herunterladen (Seite 53)

b) Installing the BJ cartridges

Open the printer cover to install the BJ cartridges on the carriage. Install the Color

BJ cartridge on the right side of the carriage. Install either the Black or Photo BJ

cartridge on the left side of the carriage. After installing the BJ cartridges, secure

them by lowering the cartridge lock lever. Remove the protective tanks from the BJ

cartridges.

If both the left and right BJ cartridges are not installed correctly, the

carriage may fail to return to its home position when the cover is closed.

In this case, ensure that the BJ cartridges are installed firmly in the

correct position. If the carriage does not return to the home position, refer

Part 5: 6 TROUBLESHOOTING

(Page 5-13).

If the front cover is left open for ten minutes with both BJ cartridges

installed, the buzzer sounds for 30 seconds, and the carriage moves to the

capping position to protect the BJ cartridges' nozzles.

3-5

BJC-6000

Part 3: Operating Instructions

Protective Tanks

Cartridge Lock Lever

Figure 3-6 Installing BJ Cartridges

CAUTION

NOTE

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 173 174

Keine Kommentare

Canon BJC-6000 Technical Information Seite 53