Canon IP6000 Bedienungsanleitung PDF herunterladen

AT Canon ip6000 CISS Instruction

Thank you for purchasing AT Continuous Ink Supply System. We appreciate your support and

will try our best to make your experience with our products a pleasant one. Printing has been a

different experience ever since you installed AT Continuous Ink Supply system on your own

printer. Just imagining being able to print without regard to the ink level in those expensive little

cartridges.

Please take your time installing AT Continuous Ink Supply system. Do not remove your old

cartridge until you have the AT CIS system primed and ready to install (to prevent the drying of

heads). In addition, make sure you are getting perfect nozzle checks before installing the AT

CIS system. The AT CIS system won’t be able to work properly if the nozzles are previously

clogged.

Most people get a perfect nozzle check the first time after installing the AT Continuous Ink

Supply system; others may need to run two or three cleaning cycles or let the printer sit for a

while before they get the perfect results.

1. General Guide:

1) Components

A. CIS system 1 set

B. Air filters 6 pcs

C. Support Arm 1 set

D. Refill Kit 6 pcs

E. Instruction CD 1 pc

2) Opening box inspection

a、Check whether all the accessories are ready.

b、Check whether there's the leakage of the CISS, whether some tubes have been separated from the

CISS, whether there are air bubbles in the tube (If there exists more than 20CM air space, please kindly to

contact with the local dealer)

1 2 3 4 5 6

AT Canon ip6000 CISS Instruction Thank you for purchasing AT Continuous Ink Supply System. We appreciate your support and will try our best to make y

Seite 2

2. Installation Procedure: 1) 1st Step: Pull the rubber plug out of the bottom tray (Picture 9). Keep the Ink Filling Hole of the ink tank opened (P

Seite 3

After that: Put the CISS at the right side of Pull out the rubber plug from Insert the Air Filter. the printer.

Seite 4

Clip the tube on the support arm. Take off the label on the shortest arm, and stick it on the right side of the printer. Then clip the tube

Seite 5

6) 6th Step: Insert the power cord. Put something in the Sensor. Then turn on the power button. 7) 7th step: Check the Printer Head

Seite 6

(Please keep the printer and the ink tank at the same horizontal level during the process of refilling ink.) Attention for maintenance: If the print

Keine Kommentare

Canon IP6000 Bedienungsanleitung