Canon PIXMA TS8252 Bedienungsanleitung

Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly.Note•Do not load envelopes higher than the load li

After closing the feed slot cover, the paper setting confirmation screen for the rear tray appears on thetouch screen.8.If page size and media type sh

Placing Multi-purpose TrayCautions When Printing with Multi-purpose TrayPlacing a Printable Disc108

Cautions When Printing with Multi-purpose TrayCautions Common to using Multi-purpose Tray• Be sure to use the multi-purpose tray supplied with this pr

Placing a Printable DiscBefore Placing a Printable DiscPlacing a Printable DiscRemoving a Printable Disc110

Before Placing a Printable DiscA printable disc differs from regular disc (BD/DVD/CD, etc.) in that its label surface has been speciallyprocessed or p

Placing a Printable DiscTo print onto a printable disc, place it on the supplied multi-purpose tray, and then insert it into the printer.This procedur

1.WITH PRINT SIDE FACING UP, place printable disc, and press it against lock (C) at bottom.2.While pressing down lock with printable disc, insert top

4. Insert multi-purpose tray straight in in horizontal direction until arrow ( ) on multi-purposetray guide is approximately aligned with arrow ( ) on

Removing a Printable Disc1. Pull out multi-purpose tray.2.While pressing down lock (A), take out printable disc from slits (B) on multi-purpose tray,a

Symbols Used in This DocumentWarningInstructions that, if ignored, could result in death, serious personal injury, or property damage caused byincorre

Loading OriginalsLoading Originals on PlatenLoading Based on UseSupported OriginalsHow to Detach / Attach the Document Cover116

Loading Originals on Platen1. Open the document cover.2. Load original WITH SIDE TO SCAN FACING DOWN on platen.Loading Based on UseSupported Originals

Important• After loading the original on the platen, be sure to close the document cover before starting to copy orscan.118

Loading Based on UseLoad the original in the correct position according to the function to use. If you do not load the originalcorrectly, it may not b

Loading the Original to Be Aligned with the alignment mark Place the original WITH THE SIDE TO SCAN FACING DOWN on the platen and align it with theali

Loading Two or More Originals on PlatenPlace the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.40 inch (1 cm) or more spacebetween the edges (d

Supported OriginalsItem DetailsTypes of originals • Text document, magazine, or newspaper• Printed photo, postcard, business card, or disc (BD/DVD/CD,

How to Detach / Attach the Document CoverDetaching the document cover:Hold up the document cover in portrait orientation and then tip it back.Attachin

124

Inserting the Memory CardBefore Inserting the Memory CardInserting the Memory CardRemoving the Memory Card125

Touch-enabled Device Users (Windows)For touch actions, you need to replace "right-click" in this document with the action set on the operati

Before Inserting the Memory CardThe following types of memory cards and image data are compatible with the printer.Important• If you took and saved ph

Printable Image Data• This printer accepts images taken with a camera compliant with the Design rule for Camera Filesystem (Exif 2.2/2.21/2.3 complian

Inserting the Memory CardImportant• When a memory card is inserted into the card slot, the Access lamp is lit. When the Access lamp isflashing, the pr

Important• Part of the memory card will protrude from the card slot, but do not force it into the slot any further.This can damage the printer or the

Removing the Memory CardImportant• If you used the card slot as the memory card drive of a computer, you must perform the "safe removal"oper

Replacing Ink TanksReplacing Ink TanksChecking Ink Status on the Touch ScreenInk Tips131

Replacing Ink TanksWhen remaining ink cautions or errors occur, the message will appear on the touch screen to inform you ofthe error. In this state,

Important•Do not touch other parts besides the ink tanks.•Handle the ink tank carefully to avoid staining of clothing or the surrounding area.•Discard

5. Hold the ink tank with the orange protective cap (E) pointing up while being careful not toblock the Y-shape air hole (D).6.Lift up the tab on the

8.Press on the top of the ink tank until the ink tank snaps firmly into place.Important• You cannot print if the ink tank is installed in the wrong po

Trademarks and Licenses• Microsoft is a registered trademark of Microsoft Corporation.• Windows is a trademark or registered trademark of Microsoft Co

Caution• When closing the scanning unit / cover, be careful not to get your fingers caught.Note• If the error message appears after the scanning unit

Checking Ink Status on the Touch Screen1. Make sure that the power is turned on, and display the HOME screen.If the HOME screen is not displayed, tap

Ink TipsHow is ink used for various purposes other than printing?Ink may be used for purposes other than printing.When you use the Canon printer for t

If Printing Is Faint or UnevenMaintenance ProcedurePrinting the Nozzle Check PatternExamining the Nozzle Check PatternCleaning the Print HeadDeep Prin

Maintenance ProcedureIf print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misalignedprinted ruled

Apache LicenseVersion 2.0, January 2004http://www.apache.org/licenses/TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION1. Definitions."

Aligning the Print HeadIf printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print headposition.Note• If the

The Maintenance screen will appear.5. Select Auto head alignment.The confirmation screen will appear.6.Confirm the message, then select Yes.The operat

Aligning the Print Head ManuallyTry aligning the print head manually after automatic print head alignment if printing results are not asexpected, as w

The confirmation screen will appear.Note•To print and check the current head position alignment values, select Print the head alignmentvalue.6.Check m

Note• If all patterns look different, choose the pattern in which vertical streaks are least noticeable.Subtle vertical streaksNoticeable vertical str

Note• If all patterns look different, choose the pattern in which vertical streaks are least noticeable.Subtle vertical streaksNoticeable vertical str

Note• If all patterns look different, choose the pattern in which horizontal stripes are least noticeable.Subtle horizontal stripesNoticeable horizont

CleaningCleaning Exterior SurfacesCleaning Platen and Document CoverCleaning Paper Feed RollersCleaning Inside the Printer (Bottom Plate Cleaning)Clea

2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributorhereby grants to You a perpetual, worldwide, non-e

Cleaning Paper Feed RollersIf the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.In this case, clean the

9. Make sure that the paper feed roller has stopped rotating, then follow the message to loadthe three sheets of A4 or Letter-sized plain paper.10. Se

Cleaning Inside the Printer (Bottom Plate Cleaning)Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed p

9. Load only this sheet of paper in the cassette with the ridges of the creases facing up andthe edge of the half with no crease facing to the far sid

Important• Be sure to turn off the power and unplug the power cord before cleaning the printer.163

OverviewSafetySafety PrecautionsRegulatory InformationWEEE (EU & EEA)Handling PrecautionsCanceling Print JobsLegal Restrictions on Scanning/Copyin

SafetySafety PrecautionsRegulatory InformationWEEE (EU&EEA)165

Safety PrecautionsSafety Precautions• This manual contains important notices and safety precautions about your printer.Do not use the printer in ways

• In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contactwith skin, wash with soap and water immediately. If

General Notices• Do not tilt the printer, stand it on end, or turn it upside down. This may cause ink to leak.• Do not place anything on top of the pr

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor providesthe Work (and each Contributor provides its Con

Regulatory InformationUsers in the U.S.A.FCC Notice (U.S.A. Only)For 120V, 60Hz modelModel Number: K10481 (Contains FCC Approved WLAN Module K30365, F

InterferenceDo not use the printer around medical equipment or other electronic devices. Signals from the printer mayinterfere with the correct operat

WEEE (EU&EEA)Only for European Union and EEA (Norway, Iceland and Liechtenstein)This symbol indicates that this product is not to be disposed of w

Ce symbole indique que ce produit ne doit pas être jeté avec les ordures ménagères, conformément à ladirective DEEE (2012/19/UE) et à la réglementatio

peligrosas que normalmente están asociadas con los RAEE. Al mismo tiempo, su cooperación a la horade desechar correctamente este producto contribuirá

Apenas para a União Europeia e AEE (Noruega, Islândia eLiechtenstein)Este símbolo indica que o produto não deve ser colocado no lixo doméstico, de aco

Αυτό το σύμβολο υποδηλώνει ότι αυτό το προϊόν δεν πρέπει να απορρίπτεται μαζί με τα οικιακάαπορρίμματα, σύμφωνα με την Οδηγία σχετικά με τα Απόβλητα Η

kierrätysjärjestelmän ylläpitäjältä ja jätehuoltoyhtiöltä. Lisätietoja sähkö- ja elektroniikkalaiteromunkeräyksestä ja kierrätyksestä on osoitteessa w

Ez a szimbólum azt jelzi, hogy a helyi törvények és a WEEE-irányelv (2012/19/EU) szerint a termék nemkezelhető háztartási hulladékként. A terméket a k

k účinnému využívaniu prírodných zdrojov. Ďalšie informácie o mieste recyklácie opotrebovanýchzariadení získate od miestneho úradu, úradu životného pr

Redistribution and use in source and binary forms, with or without modification, are permitted providedthat the following conditions are met:* Redistr

elektros ir elektroninės įrangos (EEĮ) atliekų perdirbimo punktą. Netinkamas tokios rūšies atliekųtvarkymas dėl elektros ir elektroninėje įrangoje esa

Doar pentru Uniunea Europeană şi EEA (Norvegia, Islanda şiLiechtenstein)Acest simbol indică faptul că acest produs nu trebuie aruncat o dată cu rezidu

vrstom otpada može da ima moguće negativne posledice po životnu sredinu i ljudsko zdravlje usledpotencijalno opasnih materijala koji se uglavnom vezuj

Handling PrecautionsCanceling Print JobsLegal Restrictions on Scanning/CopyingPrinter Handling PrecautionsTransporting Your PrinterWhen Repairing, Len

Legal Restrictions on Scanning/CopyingScanning, printing, copying, or modifying copies of the following may be punishable under law.This list is non-e

Printer Handling PrecautionsDo not place any object on the document cover!Do not place any object on the document cover. It will fall into the rear tr

Transporting Your PrinterWhen relocating the printer for changing your living place or repairing it, make sure of the following.Important• Pack the pr

7. Use adhesive tape to secure all the covers on the printer to keep them from opening duringtransportation. Then pack the printer in the plastic bag.

When Repairing, Lending, or Disposing of the PrinterIf you have entered personal data, passwords and/or other security settings on the printer, such i

Keeping Print Quality HighThe key to printing with the optimal printing quality is to prevent the print head from drying or clogging.Always observe th

Use is subject to license terms below.This distribution may include materials developed by third parties.Sun, Sun Microsystems, the Sun logo and Solar

Main Components and Their UseMain ComponentsPower SupplyUsing the Operation Panel189

Main ComponentsFront ViewRear ViewInside ViewOperation Panel190

Front ViewA: Operation PanelUse to change the settings of the printer or to operate it. Before printing starts, this automatically opens.Operation Pan

I: Card SlotInsert a memory card.Before Inserting the Memory CardJ: Access lampLights or flashes to indicate the memory card status.Inserting the Memo

M: Rear TrayLoad paper here. Two or more sheets of the same size and type of paper can be loaded at the sametime, and fed automatically one sheet at a

Rear ViewA: USB PortPlug in the USB cable to connect the printer with a computer.B: Power Cord ConnectorPlug in the supplied power cord.C: Transport U

Inside ViewA: Scanning Unit / CoverScans originals. Also, lift and open it to replace an ink tank or to remove jammed paper inside theprinter.B: Print

Operation PanelA: ON button/ON lampTurns the power on or off. Lights after flashing when the power is turned on. Before turning on thepower, make sure

Power SupplyChecking that Power Is OnTurning the Printer On and OffChecking the Power Plug/Power CordUnplugging the Printer197

Checking that Power Is OnThe ON lamp is lit when the printer is turned on.Even if the touch screen is off, if the ON lamp is lit, the printer is on.No

TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OFTHIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.---- Par

Turning the Printer On and OffTurning on the printer1. Press the ON button to turn on the printer.The ON lamp flashes and then remains lit.Confirming

Important•When you unplug the power cord after turning off the printer, be sure to confirm that the ONlamp is off.Note•When pressing the ON button, a

Checking the Power Plug/Power CordUnplug the power cord once a month to confirm that the power plug/power cord does not have anythingunusual described

Unplugging the PrinterTo unplug the power cord, follow the procedure below.Important• When you unplug the power cord, press the ON button, then confir

The specification of the power cord differs depending on the country or region of use.203

Using the Operation PanelThe operation panel consists of the ON button (A) and touch screen (B).Touch the HOME screen on the touch screen with your fi

TouchTouch lightly with your finger tip.To move forward (or go back) menus or photos continuously, keep touching the forward (or back) mark.FlickFlick

Operations on the HOME ScreenDisplay the menu screen or the settings screen from the HOME screen.C: Basic menuSelect to copy or scan using the operati

(Signal strength: 50 % or less): The problem such as the printer cannot print may occur.Place the printer near the wireless router. Wi-Fi is enabled

(HOME)Displays the HOME screen. (Back)Returns the touch screen to the previous screen.BlackStarts black & white copying, scanning, etc.ColorStart

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS

Changing SettingsChanging Printer Settings from Your Computer (Windows)Changing Printer Settings from Your Computer (macOS)Changing Settings from Oper

Changing Printer Settings from Your Computer (Windows)Changing the Print OptionsRegistering a Frequently Used Printing ProfileSetting the Ink Tank to

Changing Settings from Operation PanelThis section describes the procedure to change the settings in the Device settings screen, taking the stepsto sp

For more on setting items on the operation panel:Setting Items on Operation Panel221

Setting Items on Operation PanelItems for PrinterOther device settingsLanguage selectionWeb service setupECO settingsQuiet settingItems for Paper/Prin

Print settings• Prevent paper abrasionUse this setting only if the print surface becomes smudged.Important• Be sure to set this back to OFF after prin

LAN settingsWi-FiWireless DirectWi-FiWhen Wi-Fi is selected in the LAN settings screen, the network settings information of the printer when itis conn

• Wi-Fi setupSelects the setup method for Wi-Fi connection.◦ Easy wireless connectSelect if you specify the settings of the access point information t

Network (SSID)/device name DIRECT-XXXX-TS8200seriesPassword XXXXXXXXXX (10 characters)Wi-Fi security WPA2-PSK(AES)No. of devices connected now XX/XXIP

• You cannot use a hyphen for the initial or last character of the printer name.• TCP/IP settingsPerforms IPv4 or IPv6 setting.• WSD settingSetting it

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIALDAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ORSE

Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Enable allows the printerto detect printer's IP address from the printer

Other device settings• Date display formatChanges the display format of dates when printed.Note• When ON is selected for Print date on the print setti

Note• You can also select this setting by selecting (Setup) on the HOME screen, selecting ECO,and then selecting Energy saving settings.ECO settings

Language selectionChanges the language for the messages and menus on the touch screen.231

Firmware updateYou can update the firmware of the printer, check the firmware version, or perform settings of a notificationscreen, a DNS server and a

Reset settingYou can set the settings back to the default.• Web service setup onlySets the Web service settings back to the default.• LAN settings onl

Feed settingsBy registering the paper size and the media type loaded on the rear tray or in the cassette, you can preventthe printer from misprinting

Web service setupSelect this setting item from Web service setup in (Setup).• Web service usage registration/Web service usage cancellationRegiste

ECO settingsThis setting allows you to use automatic duplex printing as a default to save paper and to turn on/off theprinter automatically to save el

1. Check that printer is turned on.2. Select (Setup) on the HOME screen.Using the Operation Panel3.Select ECO.4.Select Two-sided printing setting.

MIT LicenseCopyright (c) 1998, 1999, 2000 Thai Open Source Software Center LtdPermission is hereby granted, free of charge, to any person obtaining a

Quiet settingEnables this function on the printer if you want to reduce the operating noise, such as when printing at night.Follow the procedure below

System informationTo display this menu, select System information in (Hint).• Current versionDisplays the current firmware version.• Printer nameD

SpecificationsGeneral SpecificationsPrinting resolution (dpi) 4800* (horizontal) x 1200 (vertical)* Ink droplets can be placed with a pitch of 1/4800

◦ Square 5" x 5" 13 x 13 cm: 0.24 inch (6.0 mm)◦ Other sizes: 0.14 inch (3.4 mm)* For printable area of envelope, see below.EnvelopesAuto du

Copy SpecificationsMultiple copy max. 99 pagesIntensity adjustment 9 positions, Auto intensity (AE copy)Reduction / Enlargement 25 % - 400 % (1 % unit

WindowsOperating System Windows 10, Windows 8.1, Windows 7 SP1Note: Operation can only be guaranteed on a PC with pre-installed Windows7 or later.Hard

• In an in-house network environment, the 5222 port must be open. Contact the networkadministrator for details.Information in this manual is subject t

Information about PaperSupported Media TypesPaper Load LimitUnsupported Media TypesHandling PaperBefore Printing on Art PaperPrint Area245

Supported Media TypesFor best results, choose paper designed for how you are printing. A variety of paper for documents as wellas photos or illustrati

Note• When printing photos saved on a PictBridge (Wi-Fi) compliant device, you must specify the pagesize and media type.Printing from Digital Camera•

CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANYPARTICULAR PURPOSE.(1) Red Hat IncorporatedCopyright (c) 1994-2009 Red Hat, Inc.

• Yougata 6• Card 2.17"x3.58"Special sizesSpecial page sizes must be within the following limits:• rear tray◦ Minimum size: 2.17 x 3.51 inch

Paper Load LimitGenuine Canon PaperPaper for printing documents:Media Name <Model No.> Rear Tray CassettePaper OutputTrayCanon Red Label Superio

Plain Paper (including recycled paper)*1 Approx. 100 sheets(Legal: 10 sheets)Approx. 100 sheets Approx. 50sheets (Legal: 10sheets)Envelopes 10 envelop

Unsupported Media TypesDo not use the following types of paper. Using such paper will cause not only unsatisfactory results, but alsothe printer to ja

Handling Paper• Be careful not to rub or scratch the surfaces of any types of paper when handling.• Hold the paper as closely as possible to its edges

Before Printing on Art PaperWhen using art paper, dust is liable to be generated. It is therefore recommended that paper dust beremoved on art paper j

3. To complete the removal of paper dust, brush the paper in the other direction from top tobottom.254

PrintingPrinting from Computer Printing from Smartphone/TabletPrinting Using Operation Panel Printing from Digital CameraPaper Settings255

Printing from ComputerPrinting from Application Software (Windows Printer Driver)Printing from Application Software (macOS AirPrint)Printing Using Can

Printing from Application Software (Windows Printer Driver)Basic Printing Setup BasicVarious Printing MethodsChanging the Print Quality and Correctin

The FreeType Project is distributed in several archive packages; some of them may contain, in addition tothe FreeType font engine, various tools and c

Basic Printing SetupThis section describes settings on the Quick Setup tab used for basic printing.Basic Printing Setup1.Check that printer is turned

Important• The print quality selections will differ depending on which print setting you select.6.Select paper sourceFor Paper Source, select Automati

7. Click OKThe printer will now print using these settings.Important• When you select Always Print with Current Settings, the settings on the Quick Se

From Paper Source, check the setting or select a new paper source.The current printer settings appear in Media Type and Page Size.4.Apply settingsTo a

Paper Settings on the Printer Driver and the Printer (MediaType)When you use this printer, selecting a media type and paper size that matches the prin

Envelopes Envelope EnvelopeT-Shirt Transfers T-Shirt Transfers OthersOther High Quality Photo Paper Other High Quality Photo Paper OthersOther Fine Ar

Paper Settings on the Printer Driver and the Printer (PaperSize)When you use this printer, selecting a paper size that matches the print purpose will

Card 2.17"x3.58" 55x91mm Card 2.17"x3.58"Custom Size Others265

Various Printing MethodsSetting a Page Size and OrientationSetting the Number of Copies and Printing OrderExecute Borderless PrintingScaled PrintingPa

Setting a Page Size and OrientationThe paper size and orientation are essentially determined by the application software. When the page sizeand orient

The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg.All rights reserved except as specified below.1. N

Setting the Number of Copies and Printing OrderYou can also set the number of copies on the Quick Setup tab.1. Open the printer driver setup window2.S

• Print from Last Page: /Collate: •Print from Last Page: /Collate: 4.Click OKWhen you execute print, the specified number of copies will be printe

Execute Borderless PrintingThe borderless printing function allows you to print data without any margin by enlarging the data so that itextends slight

3. Check the paper sizeCheck the Page Size list. When you want to change it, select another page size from the list. The listdisplays only sizes that

When you are not satisfied with the result of borderless printing, reduce the amount of extension. Theextension amount decreases as the Amount of Exte

Scaled Printing1.Open the printer driver setup window2.Set scaled printingSelect Scaled from the Page Layout list on the Page Setup tab.3.Select the p

•Specify a scaling factorDirectly type in a value into the Scaling box.The current settings are displayed in the settings preview on the left side of

Note• Selecting Scaled changes the printable area of the document.275

Page Layout PrintingThe page layout printing function allows you to print more than one page image on a single sheet of paper.1.Open the printer drive

Page LayoutTo change the number of pages to be printed on a single sheet of paper, select the number ofpages from the list.Page OrderTo change the pag

Discusses general use and applications of FreeType, as well as future and wanted additions to the libraryand distribution.If you are looking for suppo

Tiling/Poster PrintingThe tiling/poster printing function allows you to enlarge image data, divide it into several pages, and printthese pages on sepa

4. Set the number of image divisions and the pages to be printedIf necessary, click Specify..., specify the following settings in the Tiling/Poster Pr

In the settings preview on the left of the Page Setup tab, click the pages that do not need to beprinted.The pages that were clicked are deleted, and

Duplex PrintingYou can also set duplex printing in Additional Features on the Quick Setup tab.Performing Automatic Duplex PrintingYou can perform the

Use normal-size printingPrint without reducing the page.Use reduced printingReduce the page slightly during printing.5.Specify the side to be stapledT

3.Select the layoutSelect Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list.4.Specify the side to be stapledThe best Stapling

• After printing the front page, there is an ink drying wait time before starting to print the back page(Operation stops temporarily). Do not touch th

Setting Up Envelope Printing1. Load envelope on the printer2. Open the printer driver setup window3.Select the media typeSelect Envelope from Commonly

6. Select the print qualitySelect High or Standard that matches your purpose for Print Quality.7. Click OKWhen you execute print, the information is p

Printing on Postcards1. Load postcard on the printer2. Open the printer driver setup window3.Select commonly used settingsDisplay the Quick Setup tab,

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS,"AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITE

7. Select the print qualityFor Print Quality, select High or Standard, according to your purpose.8. Click OKWhen you execute printing, the data will b

Overview of the Printer DriverCanon IJ Printer DriverOpening Printer Driver's Setup ScreenCanon IJ Status MonitorChecking Ink Status from Your Co

Canon IJ Printer DriverThe Canon IJ printer driver (simply called printer driver below) is software that you install onto yourcomputer so that it can

Opening Printer Driver's Setup ScreenYou can display the printer driver's setup screen from your application software or by clicking the pri

Canon IJ Status MonitorThe Canon IJ Status Monitor is an application software that shows the status of the printer and the progressof printing. You wi

In such cases, take the appropriate action as described.293

Checking Ink Status from Your ComputerYou can check the remaining ink level and the ink tank types for your model.1. Open the printer driver setup win

Instructions for Use (Printer Driver)This printer driver is subject to the following restrictions. Keep the following points in mind when using thepri

2. Open the printer driver setup window, and on the Page Setup tab, set Page Size to the samepaper size that you specified in Word.3. Set the Page Lay

Printer Driver DescriptionQuick Setup Tab DescriptionMain Tab DescriptionPage Setup Tab DescriptionMaintenance Tab DescriptionCanon IJ Status Monitor

Basic OperationPrinting Photos from a ComputerPrinting Photos from a Smartphone/TabletCopyingPrinting Photos from Memory CardPrinting a Disc Label fro

Quick Setup Tab DescriptionThe Quick Setup tab is for registering commonly used print settings. When you select a registered setting,the printer autom

If Page Size, Orientation, and Copies were set from the application software, those settings havepriority.EnvelopeIf you select this setting for print

and click Specify... Then in the Page Layout Printing dialog box that appears, specify the PageOrder.4-on-1 PrintingPrints four pages of the document

OrientationSelects the printing orientation.If the application used to create your document has a similar function, select the same orientation thatyo

Always Print with Current SettingsPrints documents with the current settings starting from the next print execution.When you select this function and

Save the orientation settingSaves the Orientation to the printing profile in Commonly Used Settings.To apply the saved print orientation when the prin

Switching the Paper Source to Match the PurposeDisplaying the Print Results Before PrintingSetting Paper Dimensions (Custom Size)Printing a Color Docu

Main Tab DescriptionThe Main tab allows you to create a basic print setup in accordance with the media type. Unless specialprinting is required, norma

Print QualitySelects your desired printing quality.Select one of the following to set the print quality level that is appropriate for the purpose.Impo

Custom dialog boxSet the quality level, and select the desired print quality.QualityYou can use the slider bar to adjust the print quality level.Impor

Printing Photos from a ComputerThis section describes how to print photos with Easy-PhotoPrint Editor.1. Open rear tray cover (A). Pull straight up an

Important• This function is not available for certain Media Type settings.BrightnessAdjusts the brightness of your print. You cannot change the levels

Displaying the Print Results Before Printing309

Page Setup Tab DescriptionThe Page Setup tab allows you to determine how a document is to be arranged on the paper. Also, this taballows you to set th

To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees leftwhen orientation is [Landscape] check box.Rotate 180 deg

Page LayoutMultiple pages of document can be printed on one sheet of paper.Specify...Opens the Page Layout Printing dialog box.Click this button to se

Important• If the application used to create your document has a similar function, specify the number of copieswith the application without specifying

Preview IconShows the settings made on the Page Layout Printing dialog box.You can check what the print result will look like before you actually prin

Booklet Printing dialog boxThis dialog box allows you to set how to bind the document as a booklet. Printing only on one side andprinting a page borde

Print Options dialog boxMakes changes to print data that is sent to the printer.Depending on the environment, this function may not be available.Disab

Print after creating print data by pageThe print data is created in page units, and printing starts after the processing of one page of printdata is c

5.Slide right paper guide (D) to align with both sides of paper stack.6.Close feed slot cover (C) gently.After closing the feed slot cover, the paper

Define Stamp...Opens the Stamp Settings dialog box.You can check the details of a selected stamp or save a new stamp.Place stamp over textSets how the

For Date/Time/User Name, the creation date/time and user name of the printed object aredisplayed in Stamp Text.Important• Stamp Text appears grayed ou

PositionSpecifies the stamp position on the page.Selecting Custom from the list allows you to enter values for the X-Position and Y-Positioncoordinate

Select File...Opens the dialog box to open a file.Click this button to select a bitmap file (.bmp) to be used as the background.Layout MethodSpecifies

Maintenance Tab DescriptionThe Maintenance tab allows you to start the Canon IJ Printer Assistant Tool or check the status of theprinter. Maintenance

Important• If the font for displaying the language of your choice is not installed in your system, thecharacters will be garbled.323

Canon IJ Status Monitor DescriptionThe Canon IJ Status Monitor displays the printer status and the printing progress. The printer status isshown by th

: There is a notice about something other than a warning or an error. : There has been an error which requires a service.Ink TankIf a low ink warning

Display Warning AutomaticallyWhen a Low Ink Warning OccursStarts the Canon IJ Status Monitor window automatically and displays it in front of theother

Installing the MP DriversYou can access our web site through the Internet and download the latest MP Drivers for your model.1. Turn off the printer2.S

7. If page size and media type on touch screen match size and type of paper loaded in reartray, select Yes.If not, select Change to change the setting

Printing Using Canon Application SoftwareEasy-PhotoPrint Editor Guide328

Printing Using a Web ServiceUsing PIXMA/MAXIFY Cloud LinkPrinting with Google Cloud Print329

Printing from Smartphone/TabletPrinting from iPhone/iPad/iPod touch (iOS)Printing from Smartphone/Tablet (Android)Printing from Windows 10 Mobile Devi

Printing/Scanning with Wireless DirectYou can connect devices (e.g. smartphone, or tablet) to the printer by two methods below.• Wireless connection (

8. Select ON.The Wireless Direct is enabled and a device can be connected to the printer wirelessly.Note• To show the password, select Show password.

• Depending on the device you are using, entering the password is required to connect a deviceto the printer via Wi-Fi. Enter the password specified f

6. Select Settings.7. Select a setting item.•Change SSID/device nameChange the identifier (SSID) for Wireless Direct.The identifier (SSID) is the prin

If you want the printer to display the screen to inform you a Wi-Fi Direct compatible device isconnecting to the printer, select Yes.Important•To prev

Printing Photo DataPrinting Photographs Saved on Memory Card BasicSetting Items for Photo Printing Using Operation Panel336

Printing Photographs Saved on Memory CardYou can print the photograph saved on the memory card easily.This section describes the procedure to print th

11. Click photos (G) you want to print and select Open (H).For Windows:To select two or more photos at a time, click photos while pressing the Ctrl ke

You can print a copy of the displayed photo by tapping Color.•To change the display method, the number of copies, or the print settings:Tap near the

Note• You can specify the number of copies for each photo. Display the photo you want to print andspecify the number of copies when the desired photo

F: Select to zoom in on the photo.For details:Using Useful Display FunctionsG: Select display photo with specifying the date (last modified date of da

• While processing the print job, you can add the print job (Reserve photo print).Adding Print JobAdding Print JobYou can add the print job (Reserve p

Setting Items for Photo Printing Using Operation PanelYou can specify the setting of page size, media type, photo fix and so on to print the photos sa

on the touch screen. In this case, select on the upper left on the touch screen to check themessage and change the setting.• The settings of the pag

Other device settings344

Disc Label PrintingCopying Label Side of Disc BasicPrinting Photo from Memory Card onto Disc Label345

Copying Label Side of DiscYou can copy the label of an existing BD/DVD/CD and print it on a printable disc.Important• You cannot print on 3.15 inches

If the print result is blurry, select Bleed-proof. Blurring may be reduced by printing with less ink.7.Follow on-screen instructions to load copy sour

For Windows:Click Print (J).For macOS:Click Next. When the Print dialog appears, specify your model name, paper, and other options, and thenclick Prin

Note•You can see the procedure to set the printable disc by selecting How to set.•For more on setting the printable disc:Placing a Printable Disc11.Se

Printing Photo from Memory Card onto Disc LabelYou can print a photograph saved on a memory card onto the disc label of the printable disc.Important•

A: Specify the outer circle.B: Specify the inner circle.Note•Measure the outer and inner diameters of the printing surface of the printable disc and m

12. Check message and tap Color.13. Follow on-screen instructions to set printable disc.Note•You can see the procedure to set the printable disc by se

Paper SettingsBy registering the paper size and the media type loaded on the rear tray or in the cassette, you can preventthe printer from misprinting

• When you insert the cassette:The screen to register the cassette paper information is displayed.If the page size on the touch screen matches the siz

When you start printing/copying, a message is displayed and the paper setting specified for printing/copying is shown under the message.Check the mess

Note• If you do not know what paper information to register to the printer, tap (Back) when thescreen to select the operation is displayed.• For mor

CopyingMaking Copies Basics Reducing/Enlarging CopiesTwo-Sided Copying Special Copy MenuCopying Using Smartphone or Tablet356

Making CopiesThis section describes the procedure to copy with Standard copy.1. Check that printer is turned on.2.Load paper.3.Select Copy on the HO

Printing Photos from a Smartphone/TabletThis section describes how to print photos with Canon PRINT Inkjet/SELPHY.For details on how to download Canon

Tap or to specify the number of copies.If you keep touching here, the number scrolls by 10.You can also flick the number to specify.C: Display the

The screen below is displayed when you can add the copying job.Load the original on the platen and tap the same button (Color or Black) as the one whi

Setting Items for CopyingYou can change the copy settings such as magnification and intensity.Print Settings ScreenNote•For more on the print settings

Note• Depending on the copy menu, some setting items cannot be selected. This section describes thesetting items in Standard copy.The setting item whi

• Page sizeSelect the page size of the loaded paper.• Type (Media type)Select the media type of the loaded paper.• Print qlty (Print quality)Adjust pr

ScanningScanning from Computer (Windows) Scanning from Computer (macOS)Scanning from Operation Panel Scanning Using Smartphone/Tablet363

Scanning from Computer (Windows)Scanning According to Item Type or Purpose (IJ Scan Utility)IJ Scan Utility FeaturesScanning Easily (Auto Scan) Basic

Scanning According to Item Type or Purpose (IJ Scan Utility)IJ Scan Utility FeaturesScanning Easily (Auto Scan) BasicsScanning Documents and PhotosCr

IJ Scan Utility FeaturesUse IJ Scan Utility to scan and save documents, photos, or other items at one time by simply clicking thecorresponding icon.Mu

Note• To set the applications to integrate with, see Settings Dialog Box.367

5.Slide right paper guide (D) to align with both sides of paper stack.6.Close feed slot cover (C) gently.After closing the feed slot cover, the paper

Scanning Easily (Auto Scan)Auto Scan allows for automatic detection of the type of the item placed on the platen.Important• The following types of ite

Scanning Documents and PhotosScan items placed on the platen with settings suitable for documents or photos.Save documents in formats such as PDF and

Creating/Editing PDF FilesYou can create PDF files by scanning items placed on the platen. Add, delete, rearrange pages or makeother edits in the crea

5. Click (Scan) on Toolbar.Scanning starts.Note• To open a file saved on the computer, click Open... from the File menu, and then select the fileyou

When deleting pages:Click the page you want to delete, and then click (Delete Page) on the Toolbar.Note• These buttons appear when two or more pages

Scanning Using Application Software (ScanGear)What Is ScanGear (Scanner Driver)?Starting ScanGear (Scanner Driver)Scanning in Basic ModeScanGear (Scan

What Is ScanGear (Scanner Driver)?ScanGear (scanner driver) is software required for scanning documents. Use the software to specify theoutput size, i

Advanced ModeUse the Advanced Mode tab to scan by specifying the color mode, output resolution, image brightness,color tone, and other settings.375

Starting ScanGear (Scanner Driver)Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. StartScanGear from IJ S

Scanning in Basic ModeUse the Basic Mode tab to scan easily by following these simple on-screen steps.To scan multiple documents at one time from the

7. If page size and media type on touch screen match size and type of paper loaded in reartray, select Yes.If not, select Change to change the setting

Important• Some applications do not support continuous scanning from the ADF. For details, see theapplication's manual.Note•To scan magazines con

7. Set Image corrections as needed.8. Click Scan.Scanning starts.Note• Click (Information) to display a dialog box showing the document type and oth

ScanGear (Scanner Driver) ScreensBasic Mode TabAdvanced Mode Tab380

Basic Mode TabUse the Basic Mode tab to scan easily by following these simple on-screen steps.This section describes the settings and functions availa

Document (Color) ADF Duplex (only for models supporting ADF duplex scanning)Scan both sides of documents from the ADF in color.Document (Grayscale) AD

"OCR software" is software that converts text scanned as an image into text data that can beedited in word processors and other programs.Out

Deleting:Select the output size you want to delete in Output Size List, and then click Delete. Click Saveto save the items listed in Output Size List.

Reduce gutter shadowCorrects shadows that appear between pages when scanning open booklets.Important• Be sure to see Gutter Shadow Correction for prec

• The image returns to its original state when you preview again. (Rotate Right)Rotates the preview image 90 degrees clockwise.• The result will be re

When (Thumbnail) is displayed on Toolbar:Cropping frames are specified according to the document size, and thumbnails of scanned imagesappear. Only

CopyingThis section describes how to load originals and copy them to plain paper loaded in the cassette.1. Pull out the cassette (A) from the printer.

Note• Create cropping frame(s) on the displayed image. In thumbnail view, one cropping frame can becreated per image. In whole image view, multiple cr

Advanced Mode TabThis mode allows you to make advanced scan settings such as the color mode, output resolution, imagebrightness, and color tone.This s

Enter Setting Name and click Add; the name appears in Favorite Settings List.When you click Save, the item appears in the Favorite Settings list and c

NetworkCannot Find Printer on NetworkCannot Find Printer while Using Wi-FiNetwork Key (Password) UnknownCannot Print or ConnectFor other questions abo

Scanning Problems (Windows)Scanning Problems (macOS)Scan Results Are Unsatisfactory (Windows)Scan Results Are Unsatisfactory (macOS)Cannot Print/Scan

Network Settings and Common ProblemsHere are frequently asked questions on network. Select a connection method you are using, or you want touse.Wirele

Printing/Scanning from Smartphone/TabletConnecting Printer and Wireless Router Using Easy wireless connectCannot Connect Smartphone/Tablet to Wireless

Network Communication ProblemsCannot Find Printer on NetworkNetwork Connection ProblemsOther Network Problems409

Cannot Find Printer on NetworkWhile performing printer setup:Cannot Find Printer on Check Printer Settings Screen During Setup(Windows)Cannot Proceed

Cannot Find Printer on Check Printer Settings Screen DuringSetup (Windows)If the printer cannot be found and the Check Printer Settings screen appears

5.Align paper guides (C) in front and (D) on right with paper length and width.6.Mount cassette cover (B) and insert cassette into printer.38

Cannot Find Printer on Check Printer Settings Screen During Wi-FiSetup (Windows)-Checking Power StatusAre printer and network device (router, etc.) tu

Cannot Find Printer on Check Printer Settings Screen During Wi-FiSetup (Windows)-Checking PC Network ConnectionCan you view any web pages on your comp

Cannot Find Printer on Check Printer Settings Screen During Wi-FiSetup (Windows)-Checking Printer's Wi-Fi SettingsIs printer set to allow wireles

Cannot Find Printer on Check Printer Settings Screen During Wi-FiSetup (Windows)-Checking Wi-Fi EnvironmentIs the printer connected to the wireless ro

Important• Note that some wireless routers distinguish network names (SSIDs) by the last alphanumericcharacter according to their bandwidth (2.4 GHz o

Cannot Find Printer on Check Printer Settings Screen During Wi-FiSetup (Windows)-Checking Printer's IP AddressIs printer's IP address specif

Cannot Find Printer on Check Printer Settings Screen During Wi-FiSetup (Windows)-Checking Security Software SettingsDisable block in firewall function

Cannot Find Printer on Check Printer Settings Screen During Wi-FiSetup (Windows)-Checking Wireless Router SettingsCheck wireless router settings.Check

Cannot Proceed beyond Printer Connection ScreenIf you cannot proceed beyond the Printer Connection screen, check the following.Check1 Make sure USB ca

4. Turn off printer.5. Restart computer.6. Make sure you have no application software running.7. Perform setup on web page.Note• You can use the Setup

After inserting the cassette into the printer, the paper setting confirmation screen for the cassetteappears on the touch screen.7.If page size on tou

Cannot Find Printer while Using Wi-FiCheck1 Make sure printer is turned on.If not, make sure the printer is securely plugged in and press ON button to

Note•Use 2.4 GHz frequency band to connect to a wireless router. Match the network name (SSID) set for theprinter with that for 2.4 GHz frequency band

Starting Up IJ Network Device Setup Utility• For macOS:Starting Up IJ Network Device Setup UtilityCheck7 Make sure the computer is connected to the wi

Network Connection ProblemsPrinter Suddenly Stopped Working for Some ReasonNetwork Key (Password) UnknownPrinter Cannot Be Used After Replacing Wirele

Printer Suddenly Stopped Working for Some ReasonCannot Connect to a Printer after Network Configuration ChangesCannot Connect to a Printer via Wireles

To check the settings of the wireless router, refer to the instruction manual provided with it or contact itsmanufacturer.Note• Use 2.4 GHz frequency

See below for starting up IJ Network Device Setup Utility.• For Windows:Starting Up IJ Network Device Setup Utility• For macOS:Starting Up IJ Network

Turn on the printer or devices.If the power is already turned on, cycle the power switch.Check2 Is the icon displayed on the touch screen?If not, Wi

Cannot Print/Scan through NetworkCheck1 Make sure the computer is connected to the wireless router.For more on how to check the computer settings or c

Network Key (Password) UnknownWPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot ConnectSetting an Encryption KeyWPA/WPA2 or WEP Key Set for

Selecting WPA, WPA2, or WPA/WPA2 is recommended for security reason. If your wireless router iscompatible with WPA/WPA2, you can also use WPA2 or WPA.

Printer Cannot Be Used After Replacing Wireless Router orChanged Router SettingsWhen you replace a wireless router, redo the network setup for the pri

Check2 If filtering MAC addresses or IP addresses at wireless router, check that MACaddresses or IP addresses for computer, network device, and printe

Other Network ProblemsChecking Network InformationRestoring to Factory Defaults435

Checking Network InformationChecking Printer IP Address or MAC AddressChecking Computer IP Address or MAC AddressChecking Communication Between the Co

2. Make sure network interface used by computer is selected, and then click Advanced.Make sure Wi-Fi is selected as network interface.3. Click TCP/IP

"XXX.XXX.XXX.XXX" is the IP address of the target device.A message such as the following appears.64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 t

Restoring to Factory DefaultsImportant• For Windows:Initialization erases all network settings on the printer, making printing or scanning operation f

Problems while Printing/Scanning from Smartphone/TabletCannot Print/Scan from Smartphone/Tablet440

Cannot Print/Scan from Smartphone/TabletIf you cannot print/scan from your smartphone/tablet, it is possible that your smartphone/tablet cannotcommuni

To check the settings of the wireless router, refer to the instruction manual provided with it or contact itsmanufacturer.To check the current network

Note•IJ Network Device Setup Utility allows you to diagnose and repair the network status.Select the link below to download IJ Network Device Setup Ut

Printing Network SettingsCheck5 Have you entered the proper password specified for the Wireless Direct?To check the password specified for the printer

Printing ProblemsPrinter Does Not PrintInk Does Not Come OutPaper Does Not Feed Properly/"No Paper" ErrorCannot Print on the Disc LabelPrint

Printer Does Not PrintCheck1 Make sure printer is turned on.If not, make sure the printer is securely plugged in and press ON button to turn on.The ON

Changing the Printer Operation Mode (macOS)Check4 If printing from a computer, delete jobs stuck in print queue.• For Windows:Deleting the Undesired P

Note• If multiple printers are registered to your computer, select Set as Default Printer for a printer to makethe one selected by default.•For macOS:

Ink Does Not Come OutCheck1 Make sure of the estimated ink levels in the ink tanks.Check the ink status on the touch screen.Checking Ink Status on the

Paper Does Not Feed Properly/"No Paper" ErrorCheck1 Make sure paper is loaded.Loading PaperCheck2 When loading paper, consider the following

If the paper tears in the rear tray, see List of Support Code for Error (Paper Jams) to remove it.If there are any foreign objects in the rear tray, b

If the measures above do not solve the problem, contact your nearest Canon service center to request arepair.452

Cannot Print on the Disc LabelDisc Label Printing Does Not StartMulti-Purpose Tray Does Not Feed ProperlyMulti-Purpose Tray JammedDisc Label Printing

Multi-Purpose Tray JammedPull out the multi-purpose tray gently.If the multi-purpose tray cannot be pulled out, cycle the power switch. The multi-purp

Printout Results Are UnsatisfactoryIf the print results are unsatisfactory due to white streaks, misaligned/distorted lines, or uneven colors, checkth

This setting cannot be made on the PictBridge (Wi-Fi) compliant device.Check3 If problem is not resolved, check also the sections below.See also the s

Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/Streaks or Lines Printing Is Blurry Colors Are Wrong457

White Streaks AppearCheck1 Check paper and print quality settings.Printout Results Are UnsatisfactoryCheck2 Check status of ink tanks. Replace ink ta

Perform print head deep cleaning.If the problem is not resolved after performing print head deep cleaning, turn off the printer and performprint head

Lines Are Misaligned/DistortedCheck1 Check paper and print quality settings.Printout Results Are UnsatisfactoryCheck2 Perform print head alignment.If

Paper Is Smudged / Printed Surface Is Scratched Paper Is SmudgedSmudged Edges Smudged Surface Printed Surface Is ScratchedCheck1 Check paper and print

1. Roll up paper in opposite direction to paper curl as shown below.2.Check that paper is now flat.We recommend printing curl-corrected paper one shee

1. Check that printer is turned on.2. Open Canon IJ Printer Assistant Tool.Maintenance Tab Description3.Select Select Printer... and select printer yo

Note•To prevent staining inside the printer, be sure to set the correct paper size.Check9 Set longer ink drying time.This allows the printed surface t

Vertical Line Next to ImageCheck Is loaded paper size correct?If the loaded paper is larger than the size you specified, a vertical line may appear in

Scanning Problems (Windows)Scanning Problems466

Scanning ProblemsScanner Does Not WorkScanGear (Scanner Driver) Does Not Start467

Scanner Does Not WorkCheck 1 Make sure that your scanner or printer is turned on.Check 2 Connect the USB cable to a different USB port on the computer

ScanGear (Scanner Driver) Does Not StartCheck 1 Make sure MP Drivers is installed.If not installed, install MP Drivers from the Setup CD-ROM or our we

Mechanical ProblemsPrinter Does Not Turn OnPrinter Turns Off Unexpectedly or RepeatedlyUSB Connection ProblemsCannot Communicate with Printer via USBW

Printer Does Not Turn OnCheck1 Press ON button.Check2 Make sure power plug is securely connected to printer, and then turn on again.Check3 Unplug prin

Printer Turns Off Unexpectedly or RepeatedlyCheck If printer is set to turn off automatically after a certain time, disable this setting.If you have s

4. Select Disable for Auto Power Off.5. Select OK.6. Select OK on the displayed screen.The setting to shut off the power automatically is disabled.Not

USB Connection ProblemsPrinting or Scanning Is Slow/Hi-Speed USB Connection Does NotWork/"This device can perform faster" Message Appears (W

Cannot Communicate with Printer via USBCheck1 Make sure printer is turned on.Check2 Connect USB cable properly.As the illustration below, the USB port

Wrong Language Appears in Touch ScreenFollow the instructions below to select your language.1.Press HOME button and wait a little.2.Select (Setup) i

Installation and Download ProblemsFailed to MP Drivers Installation (Windows)Updating MP Drivers in Network Environment (Windows)477

Failed to MP Drivers Installation (Windows)• If installation does not start when you insert Setup CD-ROM:Follow the instructions below to start the in

• If you cannot get past the Printer Connection screen:Cannot Proceed beyond Printer Connection Screen• Other cases:Reinstall the MP Drivers.If the MP

Updating MP Drivers in Network Environment (Windows)Download the latest MP Drivers.Download the latest MP Drivers for your model on the download page

Errors and MessagesAn Error OccursMessage (Support Code) Appears481

An Error OccursIf an error occurs in printing, for example if the paper runs out or jams, a troubleshooting message appearsautomatically. Take the app

Message (Support Code) AppearsThis section describes some of the errors and messages that may appear.Note• A support code (error number) is displayed

Error Regarding Power Cord Being Unplugged Is Displayed(Windows)The printer may have been unplugged while it was on.Check the error message that appea

3. Click General tab and check for a device problem.If a device error is shown, see Windows Help to resolve it.Other Error Messages (Windows)Check If

List of Support Code for ErrorSupport code appears on the touch screen and your computer screen when errors occur.A "support code" is an err

• 5000 to 5ZZZ5011 5012 5050 5100 5200 520E5400 5700 5B00 5B01 5C02 • 6000 to 6ZZZ6000 6001 6004 6500 6502 68006801 6830 6831 6832 6833 69006901 6902

List of Support Code for Error (Paper Jams)If paper jams, remove it following the appropriate procedure as shown below.• If you can see the jammed pap

1300CausePaper is jammed when feeding paper from rear tray.What to DoIf the paper fed from the rear tray is jammed, remove the jammed paper from the p

Note• When reloading the paper, make sure you are using suitable paper and loading it correctly.• We recommend using paper sizes other than A5 to prin

1303CausePaper is jammed when feeding paper from cassette.What to Do1.Remove jammed paper.•If the paper is jammed at the paper output slot:1300•If the

4. Select type of printable disc (C) and select Next (D).5.Click Browse (E) in From computer: and select folder with photos you want to print.6.Click

1304CausePaper is jammed when performing automatic duplex printing.What to Do1.Remove jammed paper.•If the paper is jammed at the paper output slot:13

1313CausePaper is jammed as printer pulled in printed paper.What to DoIf the paper is jammed as the printer pulled in the printed paper, try to remove

Paper Is Jammed inside PrinterIf the jammed paper tears and you cannot remove the paper from the paper output slot, or if the jammedpaper remains insi

4.Slowly pull out paper.Note•Do not touch the inner parts of the printer.If you were not able to remove the paper in this step, detach the transport u

2.Slowly pull out paper.Note•Do not touch the inner parts of the printer.3. Make sure all jammed paper is removed.4. Attach transport unit cover.Inser

5.Attach rear cover.Insert the projections of the right side of the rear cover into the printer, and then push the left side of therear cover until it

1000CausePossible causes include the following.• There is no paper in the rear tray.• Paper is not loaded in the rear tray properly.What to DoTake the

1003CausePossible causes include the following.• There is no paper in the cassette.• Paper is not loaded in the cassette properly.What to DoTake the c

1200CauseScanning unit / cover is open.What to DoClose the scanning unit / cover and wait for a while.Do not close it while you are replacing an ink t

1401CausePrint head may be damaged.What to DoTurn off the printer and turn it back on.If this does not solve the problem, contact your nearest Canon s

8.Open operation panel (I) until horizontal.9.Specify number of copies and other options under Print Settings (J).For Windows:Specify the number of co

1600CauseInk may have run out.What to DoReplacing the ink tank is recommended.If printing is in progress and you want to continue printing, tap OK on

1660CauseThe ink tank cannot be recognized.What to DoPrinting cannot be performed because the ink tank is not installed or is not compatible with this

1688CauseThe ink has run out.What to DoReplace the ink tank and close the scanning unit / cover.Printing under the current condition may damage the pr

1689CausePrinter detected ink out condition.What to DoReplace the ink tank and close the scanning unit / cover.An ink tank that was once empty is inst

1700CauseInk absorber is almost full.What to DoSelect OK on the touch screen to continue printing. Contact your nearest Canon service center to reques

1890CauseTape for securing print head holder during transportation may still be attached.What to DoOpen the scanning unit / cover and make sure the ta

2110CausePaper settings for printing or copying do not match cassette paper information set on printer.Note• See below for the correct correspondence

Select the appropriate action.Note• Depending on settings, some of the options below may not appear.Print with the loaded paper.Select this option to

• To change the message view setting when printing or copying using the operation panel of theprinter:Feed settings• To change the message view settin

4103CauseCannot perform printing with current print settings.What to DoTap Stop on the touch screen to cancel printing.Then change the print settings

11.When message prompting you to load printable disc appears on printer's touch screen, takeout multi-purpose tray from multi-purpose tray storag

5011CausePrinter error has occurred.What to DoTurn off printer and unplug it.Plug in the printer again and turn it back on.If this does not solve the

5012CausePrinter error has occurred.What to DoTurn off printer and unplug it.Plug in the printer again and turn it back on.If this does not solve the

5100CausePrinter error has occurred.What to DoCancel printing and turn off the printer.Check the following:• Make sure print head holder motion is not

5200CausePrinter error has occurred.What to DoTurn off printer and unplug it.After a while, plug in the printer again and turn it back on.If this does

5B00CausePrinter error has occurred.What to DoContact your nearest Canon service center to request a repair.Note• In the case of warnings or errors ca

6000CausePrinter error has occurred.What to DoIf the paper is jammed, remove it depending on the jammed location and cause.List of Support Code for Er

C000CausePrinter error has occurred.What to DoCancel printing and turn off the printer.Check the following:• Make sure print head holder motion is not

13.Place multi-purpose tray on multi-purpose tray guide.14.Insert multi-purpose tray straight in in horizontal direction until arrow ( ) on multi-purp

17. While pressing down lock (M), take out printable disc from slits (N) on multi-purpose tray,and remove it.Note• Easy-PhotoPrint Editor enables you

Copying a Disc LabelThis section describes how to copy the label of an existing disc (BD/DVD/CD, etc.) and print it onto aprintable disc.1. Select C

5. Specify the amount of ink (E).If the print result is blurry, select Bleed-proof. Blurring may be reduced by printing with less ink.6.Open the docum

11.Tap Black (H) or Color (I).A message prompting you to load the printable disc is displayed.12.Take out multi-purpose tray from multi-purpose tray s

2. While pressing down lock with printable disc, insert top of printable disc into slits (L).14.Place multi-purpose tray on multi-purpose tray guide.1

18.While pressing down lock (K), take out printable disc from slits (L) on multi-purpose tray,and remove it.Note• Your printer is equipped with many o

NetworkAvailable Connection MethodsThe following connection methods are available on the printer.• Wireless ConnectionConnect the printer and devices

Changing Network SettingsSee below for changing connection settings for the printer and computer/smartphone/tablet.• To change network connection meth

RestrictionsWhen connecting another device while a device (such as a computer) is already connected to the printer,connect it using the same connectio

• If you connect a device and the printer using Wireless Direct, Internet connection may becomeunavailable depending on your environment. In that case

Network Connection TipsDefault Network SettingsDetect Same Printer NameConnects to Another Computer via LAN/Changes from USB to LAN ConnectionPrinting

Default Network SettingsLAN Connection DefaultsItem DefaultEnable/Disable LAN Disable LANNetwork name (SSID) BJNPSETUPWi-Fi security DisableIP address

*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value isspecified when the

Detect Same Printer NameWhen the printer is detected during setup, plural printers with the same name may appear on the resultsscreen.Select a printer

Connects to Another Computer via LAN/Changes from USB toLAN ConnectionFor Windows:For macOS:For Windows:To add a computer to connect to the printer on

Printing Network SettingsUse the operation panel to print the printer's current network settings.Important• The network settings printout contain

3 Wireless LAN Wireless LAN Enable/Disable3-2 Infrastructure Infrastructure Enable/Disable3-2-1 Signal Strength Signal strength 0 to 100 [%]3-2-2 Link

3-2-23 Stateless PrefixLength3Stateless prefix length3XXX3-2-24 Stateless Address4 Stateless address 4 XXXX:XXXX:XXXX:XXXXXXXX:XXXX:XXXX:XXXX3-2-25 St

3-3-14 Link Local PrefixLengthLink local prefix length XXX3-3-15 IPsec IPsec setting Active3-3-16 Security Protocol Security method –5 Other Settings

6-3 Bluetooth Device Ad-dressBluetooth device ad-dress of the printerXXXXXXXX6-5 Bluetooth Device Name Bluetooth device nameof the printerXXXXXXXX7 Pr

Reconfiguration Method of Wi-Fi ConnectionFollow either procedure below to change Wi-Fi connection method (infrastructure or Wireless Direct).• For Wi

IJ Network Device Setup Utility (Windows)IJ Network Device Setup UtilityStarting Up IJ Network Device Setup UtilityDiagnosing and Repairing Network Se

IJ Network Device Setup UtilityIJ Network Device Setup Utility allows you to diagnose or repair the network status, and to perform printersettings on

Starting Up IJ Network Device Setup UtilityStart up IJ Network Device Setup Utility as shown below.• In Windows 10, select Start > (All apps > )

Diagnosing and Repairing Network SettingsIJ Network Device Setup Utility diagnoses and repairs computer settings or connection between thecomputer and

Performing/Changing Network SettingsCanon IJ Network Device Setup Utility ScreenPerforming Network Settings75

Canon IJ Network Device Setup Utility ScreenItems on Canon IJ Network Device Setup Utility ScreenMenus on Canon IJ Network Device Setup Utility Screen

Appears after performing network setup and clicking Set to close the window.• Requires SetupIndicates the printer is required to perform Wi-Fi setup.P

Appears if the printer is used by IP address specified automatically.• ManualAppears if the printer is used by IP address specified manually.Note• If

D: Help menuHelp MenuItems on Canon IJ Network Device Setup Utility Screen ToolbarThis section describes items on Canon IJ Network Device Setup Utilit

Performing Network SettingsPerforming/Changing Wired LAN Connection (Ethernet Cable) SettingsPerforming/Changing Wi-Fi SettingsAssigning Printer Infor

Performing/Changing Wired LAN Connection (Ethernet Cable)SettingsFollow the procedure below to perform/change wired LAN settings.Note• For some models

7. Perform/change settings.You can switch the screen between IPv4 and IPv6. Click the tab to switch the protocol.• IPv4 settingsA: Use IPv4 addressAlw

A: Use IPv6 addressSelect when you use the printer with IPv6 environment.B: Use Stateless Address:Select when you use an IP address assigned automatic

Performing/Changing Wi-Fi SettingsFollow the procedure below to perform/change Wi-Fi settings.Important• Enable Easy wireless connect (Cableless setup

Select Wi-Fi and click OK.6. Enter password and click OK.The Network Settings screen appears.7. Perform/change settings.You can switch the screen betw

C: Search...The Detected Wireless Routers screen is displayed to select a wireless router to connect to.For a wireless router already connected to the

• IPv6 settingsNote• If USB is selected from the pulldown menu on the toolbar, you cannot perform IPv6 settings.• The setting items below are availabl

Note• This setting item is not available depending on the printer you are using.8. Click Set.88

Assigning Printer InformationFollow the procedure below to assign/change printer location name or device name.The names appear on Device Name: and Loc

List of Models Which Does Not Support Diagnosis and RepairFunctionThe following models does not support "Diagnose and Repair" function of IJ

Handling Paper, Originals, Ink Tanks, Multi-purpose Tray,Memory Card, etc.Loading PaperPlacing Multi-purpose TrayLoading OriginalsInserting the Memory

Loading PaperPaper SourcesLoading Paper in the Rear TrayLoading Paper in the CassetteLoading Envelopes in Rear Tray92

Paper SourcesThe printer has two paper sources for feeding paper, the rear tray (A) and cassette (B).You can load all supported paper on the rear tray

Loading Paper in the Rear TrayYou can load plain paper or photo paper.You can also load envelopes on the rear tray.Loading Envelopes in Rear TrayImpor

3.Open the feed slot cover (C).4.Slide right paper guide (D) to open both paper guides.5.Load paper stack in portrait orientation WITH PRINT SIDE FACI

8.Mount cassette cover (B) and insert cassette into printer.Push the cassette into the printer until it stops.After inserting the cassette into the pr

with the paper settings. When this function is enabled, an error message is displayed if these settingsdo not match to prevent incorrect printing. Whe

Loading Envelopes in Rear TrayYou can load Envelope DL and Envelope Com 10 on the rear tray.The address is automatically rotated and printed according

3.Open the feed slot cover (C).4.Slide right paper guide (D) to open both paper guides.5.Load envelopes in portrait orientation WITH PRINT SIDE FACING