Canon Powershot SD430 Einstellungsanleitung PDF herunterladen (Seite 104)

100

Wireless Connection Troubleshooting

Please read this section if you cannot connect the camera and computer over a wireless

network or you are having trouble using the wireless networking function. See Troubleshooting

(p. 114) for other types of problems.

Connection Difficulty

Check the error message on the camera's LCD monitor if you are having difficulty getting the

camera to establish a wireless connection with the computer, and try the following solutions.

"Connection failed 1" Message

Cause

Failed to obtain an IP address from the DHCP server.

Solution 1:

Check the DHCP server settings to confirm that they are correct, or confirm

that there are a sufficient number of IP addresses that can be assigned. For

details, see the user guide for the wireless LAN router. Consult with your

network administrator if you have one.

Solution 2:

If your network is without a DHCP server, select the [Advanced Mode] and

configure the IP address as described below.

How to Display the IP Address Configuration Screen

Perform steps 1-7 in Registering the Target Device with the Camera (p. 78) and

continue with the procedures below.

Select [Advanced Mode]

and click [Next]

Click [Set IP Address]

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 129 130

Keine Kommentare

Canon Powershot SD430 Einstellungsanleitung Seite 104