Canon BC-05 Bedienungsanleitung PDF herunterladen

Canon BJC 210/230/240/250/260/1000 Printers

(For Black - See Instructions for Canon BC-02 Cartridge)

Step 1:

You must start with a cartridge you know is working

properly, or one that has not been empty for more than 30

minutes. Drill a hole in the top of the cartridge into the

chamber you want to refill first, using the MIS Yellow

Tool. Angle the Tool towards the Print Head. See photo.

Step 2:

If your kit came with a syringe, fill it with 5 cc of ink. If

you have a bottle, prepare the bottle by placing the o-ring

in the cap and pushing the 2" needle onto the end of the

cap. Screw the cap on the bottle. Insert the needle or

syringe into the hole you just drilled. Make sure you are

putting the correct ink in the chamber. Aim the needle

towards the print head. Push the needle all the way in

towards the print head, then draw back slightly, about

1/8". Keep the print head in contact with some paper

towel during all refilling. It is very important to always

keep the needle as deep as possible when injecting ink.

Step 3:

Inject ink into the cartridge slowly and firmly. Don't over

fill. Only inject about 5 cc or 1/6 of a 1 oz bottle. Clean

the fill hole and cover it with black electrical tape. Then

fill the next color.

Step 4:

Run 3 cleaning cycles, then print an image that uses all colors. We recommend a multi-

colored bar chart made in your word processor or graphics program. Print 4 - 5 sheets

(8x10) of this pattern. If you see skipping or banding run a couple more cleaning cycles,

then print 4 - 5 sheets of the bar chart. Don't run more than 3 cleaning cycles back to back. It

can make things worse.

1 2

Seite 1

Canon BJC 210/230/240/250/260/1000 Printers (For Black - See Instructions for Canon BC-02 Cartridge) Step 1: You must start with a cartridge

Seite 2

Trouble Shooting: If your machine prints in streaks or is missing lines, you should perform the print head cleaning procedure as described in the

Keine Kommentare

Canon BC-05 Bedienungsanleitung