Canon EOS C300 Spezifikationen PDF herunterladen (Seite 84)

Setting the Time Code

In mode, the camcorder can generate a time code signal and embed it in your recordings. You can have

the camcorder output the time code signal from the HD/SD SDI terminal or TIME CODE terminal (A 90). In

mode, you can output the time code of the clip being played back through the same terminals.

Additionally, you can superimpose the time code on video output from the HDMI OUT terminal or SYNC OUT

terminal. For NTSC recordings, you can also select between a drop frame and non-drop frame time code.

To synchronize the camcorder’s time code to an external time code generator, refer to

Synchronizing with an

External Device

(A 88).

Selecting the Running Mode

You can select the running mode of the camcorder’s time code.

1 Open the time code [Mode] submenu.

[¤ TC/UB Setup] > [Time Code] > [Mode]

2 Select the desired option and then press SET.

• If you selected [Regen.], you do not need to perform the rest of this

procedure. If you selected [Preset] and would like to set the time

code’s initial value, see the following section

Setting the Time Code’s

Initial Value

3 After you select [Preset], open the time code [Run] submenu.

[¤ TC/UB Setup] > [Time Code] > [Run]

4 Select the desired option and then press SET.

Options

Operating modes:

[Preset]: The time code starts from an initial value you can select in

advance. The default initial time code is 00:00:00.00. The time

code’s running mode depends on the [Run] setting.

[Rec Run]: The time code runs only while recording so clips

recorded consecutively on the same CF card will have

continuous time codes.

[Free Run]:The time code starts running the moment you press

SET to select this option and keeps running regardless

of the camcorder’s operation.

[Regen.]: The camcorder will read the selected CF card and the time code

will continue from the last recorded time code on the CF card. The

time code runs only while recording so clips recorded

consecutively on the same CF card will have continuous time

codes.

[¤ TC/UB Setup]

[Time Code]

[Mode]

[Regen.]

[¤ TC/UB Setup]

[Time Code]

[Run]

[Rec Run]

COPY

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 201 202

Kommentare zu diesen Handbüchern

Keine Kommentare

Canon EOS C300 Spezifikationen Seite 84

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamerarekorder Canon EOS C300