Canon XL 2 Bedienerhandbuch PDF herunterladen (Seite 58)

Setting the User Bit

The user bit display can be selected from the date or the time of recording, or an identification code

consisting of 8 characters in the hexadecimal system that is useful for labeling tapes. There are sixteen

possible characters: the numbers 0 to 9 and the letters A to F.

If a user bit is being received along with an external time code, you can also choose to record the

external user bit on tape.

1. Open the menu and select [RECORDING SETUP]. Select [UB SELECT], select a setting

option and press the SET button.

If you selected [00 00 00 00], the user bit set/reset options appear; continue with the procedure below.

Otherwise, close the menu.

If you selected [00 00 00 00]:

2. Select [SET].

The first part of the display flashes.

3. Turn the SELECT dial to select a number or letter and press the SET button.

• The next character of the user bit starts flashing.

• Set the rest of the user bit in the same way.

4. Close the menu.

 To reset the user bit to [00 00 00 00], select [CLEAR] in step 2.

 The user bit can be recorded when recording with the camcorder or from analog devices. The user

bit set in the camcorder cannot be recorded when recording from digital devices (DV or HDV).

Displaying the User Bit

Open the menu and select [DISPLAY SETUP/ ]. Select [UB DISPLAY], set it to [ON] and

close the menu.

Recording an External User Bit

Open the menu and select [RECORDING SETUP]. Select [UB REC], select [EXT.USR-BIT]

and close the menu.

( 29)

RECORDING SETUP UB SELECT•••00 00 00 00

( 29)

DISPLAY SETUP/ UB DISPLAY•OFF

( 29)

RECORDING SETUP UB REC•••INT.USR-BIT

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 156 157

Keine Kommentare

Canon XL 2 Bedienerhandbuch Seite 58