Canon image runner 2545i Betriebsanweisung PDF herunterladen (Seite 55)

Identifying and Isolating Problems

4-2

Troubleshooting

Identifying and Isolating Problems

You may experience problems while operating the machine. Take a minute to see if

there is a simple solution to your problem before contacting your local authorized

Canon dealer.

Printer Problems

Indicators are off and the display is blank.

Cause 1 Power switch is not turned ON.

Remedy Check the power switch to ensure that the machine is turned ON.

Cause 2 Power cord is not connected.

Remedy Check the power cord and make sure it is connected at both ends.

Cause 3 No power at the AC outlet.

Remedy Check the AC outlet. Consult an electrician or the local power company. If you

are using a power strip, ensure that the power lead is connected at the source

and turned ON.

Printing does not start.

Cause 1 Output tray is full of paper during the print job. (When the optional Inner

Finisher-B1 is set up, the selected tray is full of paper.)

Remedy Remove the paper in the tray.

Cause 2 The machine and host computer are not properly connected.

Remedy Check the cable connection between the host computer and the machine. (See

Chapter 1, “Machine Installation,” in the User’s Guide.)

Cause 3 A failure occurred in the machine or an optional device.

Remedy Follow the instructions in the message on the touch panel display.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 125 126

Keine Kommentare

Canon image runner 2545i Betriebsanweisung Seite 55