Canon i900D Betriebsanweisung PDF herunterladen (Seite 35)

Replacing an Ink Tank

When replacing an ink tank, check the model number very carefully.

The printer will not print properly if the wrong ink tank is used, or installed in the incorrect position.

With this printer, ink tanks must be installed from the right in the order indicated below.

Knowing When to Replace Ink Tank

If an ink tank needs replacing the

Power

lamp will change from green to orange and flash four times as soon

as printing begins. It is important to identify the empty tank using the LCD and replace it.

The following message appears on the LCD when ink is empty.

Printing will resume as soon as ink tank is replaced and the front cover is closed.



:Magenta : BCI-6M



Black : BCI-6BK



Photo Magenta : BCI-6PM Photo



Cyan : BCI-6C



:Yellow : BCI-6Y



Photo Cyan : BCI-6PC Photo

Should missing characters or white streaks appear despite sufficient ink levels. See “When Printing

Becomes Faint or Colors are Incorrect” on page 37.

When Low Ink is Detected

When printing starts, the message is displayed on the LCD.

[!] indicates ink low. Obtain a replacement tank as soon as possible.

zTo continue printing, select Yes and then press the OK button.

zTo cancel printing, select NO and then press the OK button.

The ink tank with symbol is out of ink.

Replace with a new ink tank.

• Press the Cancel button to cancel the current

print job.

• Press the Resume button to resume printing

with an empty ink tank.

When printing is finished, replace the ink tank

immediately. If you continue printing with an

empty ink tank, it will be a cause of trouble.

Empty ink tank

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Keine Kommentare

Canon i900D Betriebsanweisung Seite 35