Canon ME20F-SHN Bedienungsanleitung PDF herunterladen (Seite 19)

Preparing the Lens

Only when using a compatible EF Cinema lens

(A 33)

6 Connect the lens's 12-pin cable to the camera's LENS

terminal.

7Turn on the camera.

8 On the lens's MENU screen, select the signal path for

data communication with the camera.

• In the [Info] screen, set [I/Fprior] to [Mount].

Removing an EF Lens

1 Turn off the camera.

• If an EF Cinema lens is connected to the camera's LENS

terminal, disconnect the 12-pin cable after turning off

the camera.

• The camera does not have a power switch. To turn the

camera on or off, connect or disconnect the power

cable.

2 While holding the bottom of the lens, turn the lens

mount handle clockwise until it stops and remove the

lens.

• Make sure not to drop the lens when removing it.

3 Place the body cap back on the lens mount and the

dust caps back on the lens.

NOTES

• About using an EF-S lens or compatible EF Cinema lens: This camera’s sensor is larger than the sensor size for which

these lenses are designed (APS-C or Super 35mm). When using these lenses with the camera, you may

notice peripheral illumination fall-off or vignetting. To prevent this, you can use the [EF-S Lens] setting to

change the sensor area that is used for producing the image (A Network Operation Guide or Button

Operation Guide). This setting digitally enlarges the image by a factor of approx. 1.55 so the image quality

will deteriorate.

• Depending on the lens's characteristics, the corners of the picture may seem darker due to light fall-off or

illumination drop. You can have the camera compensate if it has the correction data available for the lens

(A Network Operation Guide or Button Operation Guide).

• If you are using a compatible lens*, you can use the [Camera Setup] > [Zoom-Iris Correct.] setting to have

the camera adjust the aperture while zooming** (A Button Operation Guide).

* Some EF lenses and EF Cinema lenses are not compatible with this function.

** This setting is available only by using the buttons.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 38 39

Keine Kommentare

Canon ME20F-SHN Bedienungsanleitung Seite 19