Canon LX-MU700 Bedienungsanleitung PDF herunterladen (Seite 45)

LAMPS Menu

Label Description

Mode Press ENTER to enter the Mode menu. Press ▲ or ▼ to select lamp mode.

The options are Dual, Lamp 1, Lamp 2 and Single.

Note:

1. In Lamp 1/2 mode, the projector switches between lamps when a lamp

error is detected. The corresponding lamp LED ashes.

2. A system reboot is recommended after setting the lamp mode to

Single mode. In Single mode, the projector choose shorter one of the

lamp usage time at start up, and use it while the Lamp is ON.

3. Lamp life may be shortened if the user quickly switches between

lamp mode. Lamp mode function is disabled between switch mode

operations until the operation is completed.

4. The lamp mode options are not available before lamp mode switching

is complete. It takes about 5 minutes.

Power Press ◄ or ► to select a power mode. The options are Normal, Eco and

Custom Power Level.

High Altitude This setting is required under the following conditions.

Temperature Sea Level

5°C ≤ , ≤ 23°C 1200 m ~ 3000 m

23°C < , ≤ 40°C 1219 m ~ 3048 m

Press ◄ or ► to enable or disable the cooling fan of the projector.

Note:

If the projector is in operation in a high heat or high altitude environment,

it may shut down automatically. In this setup, you can enable the High

Altitude function by selecting On and setting the fan to operate at a higher

speed to maintain proper cooling levels on the projector.

Custom Power Level Press ◄ or ► to adjust custom power level. The function is only available

when Power is Custom Power Level.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 89 90

Keine Kommentare

Canon LX-MU700 Bedienungsanleitung Seite 45