Canon EOS C100 Bedienungsanleitung PDF herunterladen (Seite 62)

Adjusting the Aperture

Exposure Compensation - AE Shift

Use AE shift to compensate the exposure that was set using automatic aperture, in order to darken or lighten the

image. You can select from 15 available AE shift levels.

1 Open the [AE Shift] submenu.

[~ Camera Setup] > [AE Shift]

2 Select an AE shift level and then press the joystick.

Available AE Shift Levels

NOTES

• You can also set the AE shift level by turning the control dial while holding the PUSH AUTO IRIS button

pressed down.

• If you set an assignable button to [AE Shift +] or [AE Shift -] (A 91), you can press the button to adjust the AE

shift level.

• When you use automatic aperture (including push auto iris) after setting an AE shift level, the camcorder will try

to adjust the aperture (f/stop) so as to achieve the AE shift level that was set rather than optimal aperture.

Light Metering Mode

Select the light metering mode to match the recording conditions. Using the appropriate setting will ensure that

the camcorder obtains the most suitable exposure level when automatic aperture is used.

1 Open the [Light Metering] submenu.

[~ Camera Setup] > [Light Metering]

2 Select the desired option and then press the joystick.

• The icon of the selected mode appears on the left of the screen.

Options

NOTES

• If you set an assignable button to [Backlight] or [Spotlight] (A 91), you can press the button to change the

light metering mode.

+2.0 +1.5 +1.25 +1.0 +0.75 +0.5 +0.25 ±0

-0.25 -0.5 -0.75 -1.0 -1.25 -1.5 -2.0

[Backlight] °: Suitable when recording backlit scenes.

[Standard]: Averages the light metered from the entire screen, giving more weight to the subject in the center.

[Spotlight] ®: Use this option when recording a scene in which only a certain part of the picture is lit, for example,

when the subject is lit by a spotlight.

[~ Camera Setup]

[AE Shift]

[±0]

The Exposure Bar

You can use the exposure bar as a reference when adjusting the aperture or

shutter speed or when compensating the exposure using AE shift. The Î on

top of the exposure bar indicates optimal exposure without any shift (AE±0); the

scale markings indicate the deviation from optimal exposure in 1/2 EV

increments. The indicator inside the exposure bar represents the current

exposure. When the difference between current and optimal exposure is larger

than ±2 EV, the indicator will flash at the edge of the exposure bar. Optimal

exposure will change depending on the light metering mode (A 62) used.

Optimal exposure AE±0

Current exposure

[~ Camera Setup]

[Light Metering]

[Standard]

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 172 173

Kommentare zu diesen Handbüchern

Keine Kommentare

Canon EOS C100 Bedienungsanleitung Seite 62

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamerarekorder Canon EOS C100