Canon XL 1A Bedienerhandbuch PDF herunterladen (Seite 38)

Recording

In normal recording conditions, the camera sets the audio recording level automatically as long as you slide

the REC LEVEL switch to A (automatic).

You can also set the recording level manually:

1. Set the recording level for stereo 1 in exactly the same way as for two channel recording.

2. Set the recording level for stereo 2 by sliding the REC LEVEL switch of the AUDIO 2

controls to M (manual).

3. Turn the L and R dials to independently adjust the recording levels of the two inputs

(corresponding to the L and R channels of the AUDIO 2 RCA jacks).

• Check the levels for each channel in the audio LCD panel.

• It is essential for you to monitor the sound using headphones.

• Adjust the headphone volume by rotating the PHONES LEVEL dial.

Setting the recording level for four channel recording

1. Set the audio mode to “12 bit ST-1, 2”.

2. Set the input for stereo 1 in exactly the same way as for two channel recording.

AUDIO 2 IN••LINE

3. Set the input for stereo 2 by connecting a device to the AUDIO 2 RCA jacks and then

selecting the appropriate option for AUDIO 2 IN:

- LINE: To record sound from a VCR, CD or other line in devices.

- MIC ATT20: To record sound using a microphone, when the sound level is high.

- MIC: To record sound using a microphone (e.g. attached via the optional MA-100 Microphone

Adapter/Shoulder Pad ).

(see p. 18)

Setting the Audio Input — Four Channel Recording

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 87 88

Keine Kommentare

Canon XL 1A Bedienerhandbuch Seite 38