Canon Pixma MP560 Series Bedienerhandbuch Seite 79

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 949
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 78
Changing the Settings
in "Making Copies".
When printing with a computer, select the size and type of the loaded paper in Printer Paper
Size (or Paper Size) and Media Type in the printer driver.
See
Printing Documents (Windows) or
Printing Documents (Macintosh) .
Loading Envelopes
You can print on European DL and US Comm.Env.#10-sized envelopes.
The address is automatically rotated and printed according to the envelope's direction by specifying
with the printer driver properly.
Important
You can only print on envelopes with the computer.
You cannot use the following envelopes.
- Envelopes with an embossed or treated surface
- Envelopes with a double flap (or sticker flaps)
- Envelopes whose gummed flaps are already moistened and adhesive
1. Prepare envelopes.
Press down on all four corners and edges of the envelopes to flatten them.
If the envelopes are curled, hold the opposite corners and gently twist them in the
opposite direction.
If the corner of the envelope flap is folded, flatten it.
Use a pen to press the leading edge in the inserting direction flat and sharpen the
crease.
The figures above show a side view of the leading edge of the envelope.
Important
The envelopes may jam in the machine if they are not flat or the edges are not aligned. Make
sure that no curl or puff exceeds 0.1 inches / 3 mm.
2.
Load envelopes.
(1)
Open the Paper Support, raise it, then tip it back.
See
Load paper.
in "Loading Photo Paper" of "Loading Paper in the Rear Tray".
(2)
Open the Paper Output Tray gently, and open the Output Tray Extension.
See
Load paper.
in "Loading Photo Paper" of "Loading Paper in the Rear Tray".
Page 79 of 949 pagesLoading Paper in the Rear Tray
Seitenansicht 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 948 949

Kommentare zu diesen Handbüchern

Keine Kommentare