Canon Pixma MP560 Series Bedienerhandbuch PDF herunterladen (Seite 904)

Specify the printer WEP settings. When changing the password (WEP key), the same change must

be made to the password (WEP key) of the access point.

Enter the same key as the one set to the access point.

The number of characters and character type that can be entered differ depending on the key

length and key format.

5 characters

13 characters

Hexadecimal (Hex)

10 digits 26 digits

Select either 64bit or 128bit.

Select either ASCII or Hex.

Select the Key ID (index) set to the access point.

Authentication

Select the authentication method to authenticate the printer's access to the access point.

Normally, select Auto. If you want to specify the method manually, select Open System or

Shared Key according to the setting of the access point.

If the printer cannot communicate with the computer after the encryption type of the printer

was switched, make sure that encryption types for the computer and the access point

matches that set to the printer.

How to Set a WEP/WPA/WPA2 Key

Page 904 of 949 pagesChanging the Settings in the Wireless LAN Sheet

Keine Kommentare

Canon Pixma MP560 Series Bedienerhandbuch Seite 904