Canon MX320 Bedienerhandbuch PDF herunterladen (Seite 725)

100

101

We recommend printing curl-corrected paper one sheet at a time.

Note

For Paper That Curls Inward When It Is Printed

Depending on the media type, the paper may be smudged or may not be fed properly even if it

is not curled inward. In such cases, follow the procedure described below to curl the paper

outward before printing. This may improve the print result.

With the printing side (A) facing up, cover the paper with a fresh sheet of plain paper to

avoid staining or scratching the surface.

Roll up the paper as shown below.

Check to see that the paper curl is within approximately 0.08 to 0.2 inches / 2 to 5 mm (B)

in height.

We recommend printing paper that has been curled outward one sheet at a time.

Check 4: If you are printing on thick paper, select the Prevent paper

abrasion setting.

Selecting the Prevent paper abrasion setting will widen the clearance between the Print Head and

the loaded paper. If you notice abrasion even with the media type set correctly to match the loaded

paper, set the machine to prevent paper abrasion by using the Operation Panel or the printer driver.

Print speed is reduced if you are selecting the Prevent paper abrasion setting.

* Deactivate the Prevent paper abrasion setting once printing is complete. If not, this setting remains

enabled for all subsequent print jobs.

To set by using the Operation Panel

Press the

button repeatedly until Device settings appears, use the

button and

button to select Print settings and Prevent abrasion in this order, then select ON.

Changing the Machine Settings on the LCD

To set by using the printer driver

Open the printer properties dialog box, and in Custom Settings in the Maintenance sheet, select

the Prevent paper abrasion check box, and then click Send.

To open the printer properties dialog box, see Opening the Printer Properties Dialog Box

(Windows)

In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu, select the Prevent

paper abrasion check box, and then click Send.

To open the Canon IJ Printer Utility, see

Opening the Canon IJ Printer Utility (Macintosh)

Check 5: If the intensity is set high, reduce the Intensity setting in the

printer driver and try printing again.

If you are using plain paper to print images with high intensity, the paper may absorb too much ink

and become wavy, causing paper abrasion.

Page 725 of 817 pagesPaper Is Smudged/Printed Surface Is Scratched

1 2 ... 720 721 722 723 724 725 726 727 728 729 730 ... 816 817

Kommentare zu diesen Handbüchern

Keine Kommentare

Canon MX320 Bedienerhandbuch Seite 725

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Adapter für die Scannertransparenz Canon MX320