Canon iPF750 Grundlegende Anleitung PDF herunterladen (Seite 12)

Troubleshooting

Phenomenon

Cause

Corrective Action

Lines are misaligned The Printhead alignment is not

adjusted.

Adjust the Printhead alignment.

(→ , If Vertical Lines are Warped or Colors are

Misaligned)

(→"Manual Adjustment to Straighten Lines and Colors

(Head Posi. Adj.)," User Manual)

(→"Adjusting Line Misalignment (Head Inc. Adj.),"

User Manual)

The type of paper specified in the

printer driver does not match the

type loaded in the printer.

Make sure the same type of paper is specified in the

printer driver as you have loaded in the printer.

Load paper of the same type as you have specified in

the printer driver.

Press the Stop button and stop printing.1.

Change the type of paper in the printer driver and

try printing again.

(→

, Loading Rolls in the Printer)

(→

, Loading Sheets in the Printer)

Images are printed crooked

Line thickness is not uniform

In the Control Panel menu, set Skew Check Lv. to

Standard .

Set Width Detection to On in the Control Panel

menu.

Access the printer driver Properties dialog box from

Print in the File menu of the source application, and

follow these steps to print.

In the Control Panel menu, Skew

Check Lv. is set to Loose or Off .

In the Control Panel menu, Width

Detection is set to Off .

In the Special Settings dialog box

of the Windows printer driver, Fast

Graphic Process is selected.

Clear the option Open Preview When Print Job

Starts on the Main sheet.

Clear the option Page Layout on the Layout sheet.

Click the Special Settings button on the Layout

sheet to display the Special Settings dialog box,

and then clear the Fast Graphic Process check

box.

Documents are printed in

monochrome

In the Advanced Settings of

the printer driver, Monochrome ,

Monochrome (BK ink) , or

Monochrome Bitmap is specified

in Color Mode .

The Printhead nozzles are

clogged.

In the Advanced Settings of the printer driver, specify

Color in Color Mode and try printing again.

Print a test pattern to check the nozzles and see if

they are clogged.

(→"Checking for Nozzle Clogging," User Manual)