Canon iPF750 Grundlegende Anleitung PDF herunterladen (Seite 2)

Paper Problems

Phenomenon

Roll Paper Cannot be Inserted into

the Paper Feed Slot

The roll paper is warped. Straighten out curls and reload the roll.

Cannot load sheets Press the Load button and select the paper source.The paper source selection is

incorrect.

Paper is not cut straight The paper is bent or curled at the

cut position.

Straighten out any curling by the edges of the paper.

Reload the paper correctly.Paper rises by the ends of the cut

position before it is cut.

Paper is not cut In the printer driver, No or Print

Cut Guideline is specified in Auto

Cut .

In the Control Panel menu,

Cutting Mode is set to Eject or

Manual .

Specify Yes in Auto Cut in the printer driver.

If the Cutting Mode is Eject , press the Cut button to

cut the paper.

Cause Corrective Action

Troubleshooting

This section gives troubleshooting tips in case of problems.

A depression is left on the leading

edge

Keeping a roll in the printer for a

long time without printing on it may

leave a depression on the leading

edge.

When printing quality is most important, we

recommend setting TrimEdge Reload to On or

Automatic so that the paper edge is automatically cut

before printing.

The size of clear film cannot be

detected

The Platen is soiled with ink or

other substances.

Open the Top Cover and clean the entire Platen .

(→

, If Paper is Soiled)

Paper is jammed by the paper feed

slot.

Remove the jammed paper.

(→

, If a Sheet Jams)

(→

, If Roll Paper Jams)

You are using paper that cannot be

cut with the Cutter Unit .

Specify Manual in Cutting Mode in the Control

Panel menu and use scissors or a cutting tool to cut

the roll after printing.

(→"Specifying the Cutting Method for Rolls," User

Manual)

If the Cutting Mode is Manual , cut rolls with scissors

or the like.

(→ , Menu Map)

Push the Release Lever back.1.

Open the Roll Cover .2.

Roll Paper is Continuously Ejected Although sheets are selected

as the paper source, a roll was

advanced.

After roll ejection stops, follow these steps to reload

the roll.

Using both hands, rotate the Roll Holder toward

the back to rewind the roll. At this time, ensure that

both ends of the roll are rewound evenly.

Pull the Release Lever forward.4.

Load the roll. At this time, be sure to press the Load

button and select Load Roll Paper .

(→

, Loading Rolls in the Printer)

1 2 3 4 5 6 7 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Canon iPF750 Grundlegende Anleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Canon iPF750