Canon iPF750 Grundlegende Anleitung PDF herunterladen (Seite 34)

Error Messages

Error Message Cause Corrective Action

GARO Wxxxx (x represents a

number)

There is a problem with the print

job.

Try printing again, using the correct printer driver.

It is also possible to continue printing in this state.

However, you may not be able to obtain the desired

printing results.

GL2: Wxxxx The memory is

full. (xxxx is 0501, 0903, or 0904)

The printer memory is full. Because the entire print job could not be received,

the printer may not be able to print the entire original.

Check the printing results.

GL2: W0502 The parameter is

out of range.

A parameter specified in an HP-

GL/2 command is out of the

supported range.

Check the print job.

GL2: W0504 This command is

not supported.

The printer has received an

unsupported HP-GL/2 command.

Check the print job.

No ink left. There is no ink left. Open the Ink Tank Cover and replace the Ink Tank for

which the Ink Lamp is flashing.

Ink insufficient. The ink level is low, so you cannot

print, clean the Printhead , or do

other operations that require ink.

Press ▲ or ▼ to select Rep. Ink Tank , and then

press the OK button. Replace the Ink Tank that is low

with a new Ink Tank .

Not much ink is left. Not much ink is left. Prepare a new Ink Tank .

We recommend replacing the Ink Tank with a new Ink

Tank at this point if you plan to print large-format or

high-quantity jobs.

Close Ink Tank Cover The Ink Tank Cover is open. Close the Ink Tank Cover .

Ink tank is empty. There is no ink left in an ink tank. Open the Ink Tank Cover and replace the Ink Tank for

which the Ink Lamp is flashing.

Unable to detect ink level

correctly.

The remaining ink level could not

be correctly detected.

Close the Ink Tank Cover .

(→ , Replacing Ink Tanks)

(→

, Replacing Ink Tanks)

(→

, Replacing Ink Tanks)

The buzzer will stop once the error is cleared.

If you have specified ProcessingOption > Warning >

On in the Control Panel menu, set it to Off instead.

If you have specified ProcessingOption > Warning >

On in the Control Panel menu, set it to Off instead.

In the Control Panel menu, setting On-the-Fly to

On may enable printing. However, check the printing

results because the image may be incomplete in

some cases.

Press ▲ or ▼ to select Continue to print , and then

press the OK button to resume printing. However,

note that this error may affect the printing quality.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Canon iPF750 Grundlegende Anleitung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Canon iPF750