Canon iPF750 Grundlegende Anleitung PDF herunterladen (Seite 13)

Troubleshooting

Cannot Print Over Network

Phenomenon

Cannot print over a TCP/IP

network

Make sure the printer's IP address is configured

correctly.

Make sure the printer's TCP/IP network settings are

configured correctly.

Make sure the computer's TCP/IP network settings

are configured correctly.

The printer's IP address is not

configured correctly.

The printer's TCP/IP network

settings are not configured

correctly.

The computer you are trying

to print from is not configured

correctly.

(→"Configuring the IP Address Using

imagePROGRAF Device Setup Utility," User Manual)

(→"Configuring the IP Address Using the Printer

Control Panel," User Manual)

(→"Configuring the Printer's TCP/IP Network

Settings," User Manual)

(→"Configuring the Printer Driver Destination

(Windows)," User Manual)

(→"Configuring the Destination in TCP/IP Networks

(Macintosh)," User Manual)

Cannot connect the printer to the

network

The Ethernet cable is not

connected correctly to the printer's

Ethernet port.

Make sure the printer is connected to the network

with the correct Ethernet cable, and then turn the

printer on. For instructions on connecting the cable,

refer to the Setup Guide .

Make sure the Link indicator is lit.

The bottom indicator is green if the printer is

connected via 1000BASE-T, while the top indicator

is orange if connected via 100BASE-TX and the top

indicator is green if connected via 10BASE-T.

If the Link indicator is not lit, check the following

points.

Cause Corrective Action

Make sure the hub is on.•

Make sure the end of the Ethernet cable is

connected correctly.

•

Make sure there is no problem with the Ethernet

cable.

•

Check the communication mode with the hub.•

Insert the Ethernet cable until it clicks and locks

in place.

If there is any problem, replace the Ethernet

cable.

Although the printer normally detects the hub

communication mode and transmission rate

automatically (in auto negotiation mode),

sometimes the hub settings cannot be detected.

In this case, conﬁ gure the connection method

manually, specifying the communication mode in

use.

(→"Conﬁ guring the Communication Mode

Manually," User Manual)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Canon iPF750 Grundlegende Anleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Canon iPF750